Acura TSX / Honda Accord CL. Manual - part 785

1. Remove the shift solenoid valves by holding the solenoid valve body.  

2. Install new O-rings (F) on each shift solenoid valves. 

NOTE:

z

Do not hold the shift solenoid connector to remove and to install the shift 
solenoid valves. Hold the shift solenoid valve body.  

z

Do not install the shift solenoid valve A before installing the shift solenoid 
valve D, and do not install shift solenoid valve B before solenoid valve E. If 
solenoid valves A and B are installed before solenoid valves D and E, it 
may damage the hydraulic control system.  

NOTE:

The new shift solenoid valve is equipped with new O-rings. If you install a 
new shift solenoid valve, there is no need to replace its O-rings.

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 45: Removing Shift Solenoid Valves 

3. Install shift solenoid valve D by holding the shift solenoid valve body; be sure to install mounting bracket 

contacts the servo body.  

4. Install shift solenoid valve A by holding the shift solenoid valve body; be sure to install mounting bracket 

contacts the bracket on shift solenoid valve D.  

5. Install shift solenoid valve E by holding the shift solenoid valve body; be sure to install mounting bracket 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

contacts the servo body.  

6. Install shift solenoid valve B by holding the shift solenoid valve body; be sure to install mounting bracket 

contacts the bracket on shift solenoid valve E.  

7. Install shift solenoid valve C by holding the shift solenoid valve body; be sure to install mounting bracket 

contacts the servo body.  

TORQUE CONVERTER HOUSING 

MAINSHAFT BEARING AND OIL SEAL REPLACEMENT 

Special Tools Required 

z

Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A  

z

Driver 07749-0010000  

z

Attachment, 62 x 68 mm 07746-0010500  

z

Attachment, 72 x 75 mm 07746-0010600  

1. Remove the mainshaft bearing and oil seal with the special tool and a commercially available 3/8-16" 

slide hammer (A). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 46: Removing The Mainshaft Bearing And Oil Seal 

2. Install the NEW mainshaft bearing until it bottoms in the torque converter housing with the special tools. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX