Acura TSX / Honda Accord CL. Manual - part 756

Fig. 30: Installing Stabilizer Link 
Courtesy of AMERICAN HONDA MOTOR CO., INC. 

STABILIZER BAR 

Removal & Installation 

1. Raise the front of the vehicle, and support it with safety stands in the proper locations and remove the 

front wheels.  

2. Disconnect the stabilizer links from the stabilizer bar on the right and left.  

3. Remove the front suspension subframe (A) from the body. See Fig. 31 .  

4. Remove the flange bolts (B) and bushing holders (C), then remove the bushings (D) and the stabilizer bar 

(E).  

5. Install the stabilizer bar in reverse order of removal and note the following items: 

z

Note the right and left direction of the stabilizer bar.  

z

Align the ends of the paint marks (A) on the stabilizer bar with each end of the bushings (B). See 
Fig. 32 .  

z

Note the before/after direction of the bushing holders.  

z

See STABILIZER LINK connect the stabilizer bar to the links. 

 

2004 Acura TSX 

2004 SUSPENSION Front - TSX

  

 

Fig. 31: Removing Front Suspension Subframe 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

 

2004 Acura TSX 

2004 SUSPENSION Front - TSX

  

 

Fig. 32: Aligning Ends Of Paint Marks On Stabilizer Bar 
Courtesy of AMERICAN HONDA MOTOR CO., INC. 

STRUT/SPRING 

 

2004 Acura TSX 

2004 SUSPENSION Front - TSX

  

 

Removal 

1. Raise the front of the vehicle, and support it with safety stands in the proper locations.  

2. Remove the front wheel.  

3. Remove the damper fork (A) from the damper (B) and lower arm. See Fig. 34 .  

4. Remove the two 8 mm flange nuts (A) and three 10 mm flange nuts (B) from the top of the damper, and 

remove the damper assembly (C). See Fig. 35 . 

NOTE:

Strut assembly may also be known as damper assembly.

NOTE:

For exploded view of strut components, see Fig. 33 .

 

2004 Acura TSX 

2004 SUSPENSION Front - TSX