Acura TSX / Honda Accord CL. Manual - part 680

 

  Index      Acura     Acura TSX 2004-2008 / Honda Accord CL 2006-2008 - service repair manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  678  679  680  681   ..

 

 

Acura TSX / Honda Accord CL. Manual - part 680

 

 

shroud.  

z

Charge the system (see SYSTEM CHARGING ).  

z

Do the PCM idle learn procedure (see ECM/PCM IDLE LEARN PROCEDURE ).  

z

Do the power window control unit reset procedure (see RESETTING THE POWER 
WINDOW
 ).  

z

Enter the anti-theft codes for the radio and the navigation system, then enter the customer's radio 
station presets.  

COMPRESSOR CLUTCH CHECK 

1. Check the armature plate for discoloration, peeling, or other damage. If there is damage, replace the 

clutch set (see COMPRESSOR CLUTCH OVERHAUL ).  

2. Check the rotor pulley bearing play and drag by rotating the rotor pulley (A) by hand. Replace the clutch 

set with a new one if it is noisy or has excessive play/drag (see COMPRESSOR CLUTCH 
OVERHAUL
 ). 

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

  

 

Fig. 131: Rotating The Rotor Pulley 

3. Measure the clearance between the rotor pulley (A) and the armature plate (B) all the way around. If the 

clearance is not within specified limits, remove the armature plate (see COMPRESSOR CLUTCH 
OVERHAUL
 ) and add or remove shims as needed to increase or decrease clearance. 

Clearance: 0.5 +/- 0.15 mm (0.020 +/- 0.006 in.)  

NOTE:

The shims are available in four thicknesses: 0.1 mm, 0.2 mm, 0.4 mm, and 
0.5 mm.

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

  

 

Fig. 132: Measuring The Clearance Between The Rotor Pulley & The Armature Plate 

4. Release the field coil connector from the holder, then disconnect it. Check the thermal protector for 

continuity. If there is no continuity, replace the thermal protector (see COMPRESSOR THERMAL 
PROTECTOR REPLACEMENT
 ). 

NOTE:

The thermal protector will have no continuity above 252° to 270°F (122° to 
132°C). When the temperature drops below 241° to 219°F (116° to 104°C), 
the thermal protector will have continuity.

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

  

 

Fig. 133: Testing Thermal Protector 

5. Check resistance of the field coil. If resistance is not within specifications, replace the field coil (see 

COMPRESSOR CLUTCH OVERHAUL ). 

Field Coil Resistance: 3.05-3.35 ohms at 68°F (20°C) 

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

  

 

 

 

 

 

 

 

 

Content   ..  678  679  680  681   ..