|
|
PGM-FI main relay 2 (FUEL PUMP) (A) from the under-dash fuse/relay box. Fig. 18: Removing PGM-FI Main Relay 2 (FUEL PUMP) 3. Start the engine, and let it idle until it stalls. 4. Turn the ignition switch OFF. 5. Remove the fuel fill cap, and relieve the pressure in the fuel tank. 6. Disconnect the negative cable from the battery. 7. Remove the quick-connect fitting cover (A). NOTE: If any DTCs are stored, clear and ignore them.
2004 Acura TSX 2004 ENGINES Fuel Supply System - TSX
|