Acura TSX / Honda Accord CL. Manual - part 210

Fig. 103: Placing The Seal On The Special Tool 

54. Coat the surface of the steering rack (A) with power steering fluid. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 104: Installing The Cylinder End Seal Onto The Steering Rack 

55. Install the cylinder end seal (B) onto the steering rack with its grooved side (C) toward the piston (D).  

56. Separate the cylinder end seal from the special tool, then remove the special tool.  

57. Install the NEW backup ring (A) on the steering rack, then place the backup ring and cylinder end seal 

(B) against the piston (C). 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 105: Installing The NEW Backup Ring On The Steering Rack 

58. Apply multipurpose grease to the steering rack teeth, then insert the steering rack into the gearbox 

housing. Be careful not to damage the inner surface of the cylinder wall with the rack edges. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 106: Inserting The Steering Rack Into The Gearbox Housing 

59. Insert an appropriate size deep socket wrench (A) onto the steering rack as shown. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX