Kia Sedona (2008 year). Manual - part 125

Fig. 151: Identifying Power Steering Pressure Tube (A) 
Courtesy of KIA MOTORS AMERICA, INC. 

11. Install the under cover (A). 

Fig. 152: Identifying Under Cover (A) 
Courtesy of KIA MOTORS AMERICA, INC. 

12. Install the steering column joint bolt . See MECHANICAL POWER STEERING SYSTEM .  

13. Install the front wheels and tires.  

14. Tighten the transaxle insulator mounting bolt (A). 

TORQUE: 

90-110 N.m (900-1100 kgf.cm, 65.1-79.5 lb-ft)

 

2008 Kia Sedona EX 

2008 TRANSMISSION Automatic Transaxle System - Sedona

  

Microsoft 

 

Monday, May 24, 2010 3:47:54 PM

Page 159 

© 2006 Mitchell Repair Information Company, LLC. 

Fig. 153: Identifying Insulator Mounting Bolt (A) 
Courtesy of KIA MOTORS AMERICA, INC. 

15. Tighten the transaxle mounting bolts (B, C). 

TORQUE: 

65-85 N.m (650-850 kgf.cm, 47.0-61.5 lb-ft) 

Fig. 154: Identifying Mounting Bolts (B, C) 
Courtesy of KIA MOTORS AMERICA, INC. 

16. Remove the SST (09200-38001) holding the engine and transaxle assembly. 

 

2008 Kia Sedona EX 

2008 TRANSMISSION Automatic Transaxle System - Sedona

  

Microsoft 

 

Monday, May 24, 2010 3:47:54 PM

Page 160 

© 2006 Mitchell Repair Information Company, LLC. 

Fig. 155: Identifying Special Tool SST (09200-38001) 
Courtesy of KIA MOTORS AMERICA, INC. 

17. Connect the transaxle oil cooler hoses (A) to the tubes (C) by fastening the clamps (B). 

Fig. 156: Identifying Oil Cooler Hoses (A) Tubes (C) And Clamps (B) 
Courtesy of KIA MOTORS AMERICA, INC. 

18. Install the shift cable by tightening the bolt (A) and clip (B). 

TORQUE: 

10-14 N.m (100-140 kgf.cm, 7.2-10.1 lb-ft)

 

2008 Kia Sedona EX 

2008 TRANSMISSION Automatic Transaxle System - Sedona

  

Microsoft 

 

Monday, May 24, 2010 3:47:54 PM

Page 161 

© 2006 Mitchell Repair Information Company, LLC. 

Fig. 157: Identifying Shift Cable, Bolt (A) And Clip (B) 
Courtesy of KIA MOTORS AMERICA, INC. 

19. Connect the transaxle wire harness connectors. 

1. Install the inhibitor switch connector (A). 

Fig. 158: Identifying Inhibitor Switch Connector (A) 
Courtesy of KIA MOTORS AMERICA, INC. 

2. Install the solenoid valve connector (A). 

 

2008 Kia Sedona EX 

2008 TRANSMISSION Automatic Transaxle System - Sedona

  

Microsoft 

 

Monday, May 24, 2010 3:47:54 PM

Page 162 

© 2006 Mitchell Repair Information Company, LLC.