Haima S5. Owners Manual

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

seat on the reading lamp for ease

for placement of some small

placement of glasses.

articles. Pull downward the

◆ Glovebox

handle to open the storage box

to place or take out the articles

easily.

◆ Small Storage Box

There is a small storage

(Small storage box)

box for storage of small articles

(Glovebox)

The glovebox is located on

behind the cigarette lighter panel

the right lower portion of the

so that the coins, mobile phone,

instrument panel. Pull rearward

and cards can be placed or taken

the handle to open the glovebox.

easily.

◆ Left Small Storage Box

◆ Cigarette Lighter

The left small storage box

is located on the left lower

(Left small storage box)

portion of the instrument panel

Page 160 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

position ACC or ON. To use the

pot). Or it will damage the

cigarette lighter, push it down.

socket or cause malfunction of

After being heated to get ready

electric devices.

for use, the cigarette lighter can

Only use the genuine

(Cigarette lighter)

pop out automatically.

cigarette lighter attached in the

Notice: Do not push down and

product.

hold the cigarette lighter, or it

◆ Backup Power Supply

will lead to overheating of

The backup power supply

cigarette lighter. If the cigarette

is located on the right C-pillar

lighter fails to pop out in

30s,

trim panel on the inner side of

pull out the cigarette lighter to

the trunk and is visible after the

prevent overheating.

liftgate is opened. If the engine

(Backup power supply)

Do not use the socket of

is stopped, the backup power

If the engine is stopped, the

cigarette lighter as the power

supply can work only when the

cigarette lighter can work only

supply for other electric devices

ignition switch is at position

when the ignition switch is at

(such as electric shaver or coffee

ACC or ON. It’s functioned as

Page 161 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

power source for electric

◆ Central Storage Box and

devices.

Armrest

Notice: Do not exceed the rated

power of backup power supply

(120W), or it will burn the

backup power supply.

◆ Front Ashtray

The front ashtray is located

(Front ashtray)

(Front cup holder)

in the front of auxiliary

Lift the cover to open the

instrument panel armrest. Lift

central storage for placement of

the upper cap to open the

articles. The central storage box

ashtray.

features the function of middle

To remove the ashes, directly

armrest and is internally fitted

take out the ashtray for cleaning

with USB port.

and then place to original

(Central storage box and

◆ Front Cup Holder

position.

armrest)

Page 162 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

The front cup holder is located

Notice: During the traveling, do

on the lower portions of four

not place hot drink at cup holder,

doors.

in order to prevent the splashed

◆ Rear Cup Holder

fluid from causing personal

injuries.

(Warning triangle)

◆ Driver’s Tools

The driver’s tools and jack

● Jack

are placed in the trunk cushion

plate on the right lower corner of

the trunk carpet. To use them,

firstly disassemble the right

connecting plate of trunk carpet.

The rear cup holder is located on

● Warning Triangle

the rear of central storage box.

event of vehicle

Pull backward to open and push

malfunction, use the warning

forward to close.

(Jack)

triangle to alert the vehicles

behind

the

malfunctioned

Page 163 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

vehicle. The warning triangle is

correctly as per the following

that will not impair the

located in the trunk cushion

requirements:

disassembly of the spare tire.

plate on the left lower corner of

Notice: Pay attention to avoid

The fixing procedure of the

the trunk carpet. Extend four

the hazardous roads, such as pits.

spare tire is in reverse order to

support

rods

and place

Check the spare tire at least once

the disassembly procedure of

approximate 100m away behind

a month to ensure sufficient

spare tire.

the malfunctioned vehicle.

pressure of spare tire (230kPa).

Spare tire

fastening bolt

● Spare Tire

Disassembly procedure of spare

The specification of the

tire:

spare tire for this series model is

Remove the trunk cushion

215/65R16 or 215/60R17. The

plate.

tires in two specifications,

Rotate the fastening bolt of

namely

215/65R16

spare

tire

with

hand

215/60R17, are fitted and the

counter-clockwise, remove the

spare tire is of full-size tire.

fastening bolt and pressure plate

(Spare tire)

Please use the spare tire

of spare tire, and place at a place

Page 164 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

Notice: Due to evaporation of

the fuel, the air pressure within

the fuel tank is higher than the

ambient pressure. If the fuel tank

cap is opened too fast, there

might be the outward splash of

(Fuel tank cap)

the fuel, which must be

◆ Fuel tank cap

cautioned.

● Open the fuel filler cap.

Therefore, while opening

● Rotate the fuel tank cap

the fuel tank cap, please loosen a

counter-clockwise to remove it

little firstly to relieve the fuel

from fuel tank.

gas from the loosened gap and

● Rotate clockwise to install

fully open the cap after the

the fuel tank cap, until a "click”

balance is reached between

sound is heard, which indicates

inside and outside pressures.

that the fuel tank cap is locked.

◆ Front/Rear Towing Hooks

Page 165 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

An installation for towing

Notice: The front wheels shall

four frequencies to provide the

bracket hook is fitted on the left

be off the ground when the

distance information. Based on

front portion of the vehicle. To

vehicle is being towed for a long

the spacing between the radar

use the towing hook, pry open

distance.

sensor and the obstacle, the

the towing hood cap on the left

◆ Parking sensor system

tones are divided into long

side of the front bumper and

When the ignition switch is

interval tone (90~150cm), short

screw in the threaded stem of

position ON and the

interval tone

(60~90cm), hash

towing bracket hook into the

transmission is shifted to reverse

interval tone

(35~60cm), and

body threaded hole at this

gear (R), the buzzer sounds “BI”

continuous tone (within 35cm).

position. A towing hook is fitted

once and the parking sensor

Note: Keep clean the sensors

on the rear portion of the vehicle.

system starts normal working so

against coverage of other

In event of emergency, conduct

that the sensors on the rear

material on the rear bumper of

the self-rescue by means of the

bumper are utilized to assist the

the vehicle, in order to ensure

front and rear towing hooks or

reversing and avoid impacting

the normal functioning.

conduct mutual rescue with

with other obstacle. The parking

Warning: The principle of the

other vehicles.

sensor system utilizes tones in

parking sensor system is to emit

Page 166 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

ultrasonic via sensors and then

● Ultrasonic noise of same

receive the reflected wave to

frequency, metal sound, and

detect the spacing to the

high pressure exhaust gas sound.

obstacles. It will lead to

● Obstacles with acute angle

detection failure under following

reflecting body and conical

applications or for the following

object.

obstacles.

● Before the reversing, make

● Press BVS button to turn

● Tiny objects such as wire

sure to check the behind and

on/off

gauze and rope.

surrounding area of the vehicle.

Conditions: Other than reverse

● Traveling within grass or

◆ 360º Panorama Camera

gear/no operation of left/right

on rough road.

(Optional)

turn

signal

lamp/<20km/h

● Cotton material or other

Operation method of

360º

vehicle speed.

materials with easy sound

panorama camera

Press the BVS button to

absorption surfaces.

Turn-on button

display front view + panorama

view on LCD display and press

BVS button repeatedly to switch

Page 167 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

over in order of front view

After

30s, the AVM turns off

automatically turn off after the

panorama view - rear view

automatically and switches over

AVM is turned off.

panorama view

- left view

to original working status of

◆ Automatic turn-on of AVM

panorama view - right view +

DVD.

● Rearview function

panorama view - front view +

OFF: Press and hold the BVS

Conditions: The vehicle is at

panorama view. If no operation

button for more than 1.5s to turn

reverse gear and the vehicle

is conducted in

30s after

off the display.

speed is less than 20km/h. The

switch-over, the AVM turns off

Note: If the DVD is under on

display interface of AVM is

automatically and switches over

status before the turn-on of the

panorama view + rear view, with

to original working status of

AVM, the DVD will

static

auxiliary

lines

DVD. If the BVS button is

automatically switch over to

(semi-transparent).

The red

pressed to display AVM

previous status after the AVM is

auxiliary lines indicate

0~1m

panorama view and at the same

turned off. If the DVD is under

spacing from the rear bumper,

time the hazard warning lamp is

off status before the turn-on of

the yellow auxiliary lines

turned on, the front view

the AVM, the DVD will

indicate 1~2m spacing from rear

panorama view is displayed.

bumper, and green auxiliary

Page 168 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

lines indicate

2~3m spacing

+ panorama view. When the

the yellow auxiliary lines

from rear bumper. The width of

left/right turn signal is turned off,

indicate 1~2m spacing from rear

the auxiliary lines is

2.4M

the AVM will turn off

bumper, and green auxiliary

(namely the distance between

immediately and return to

lines indicate

2~3m spacing

outer edges of left and right

original working status of DVD.

from rear bumper. The width of

exterior rearview mirrors). In

● Side view function

the auxiliary lines is

2.4M

such case, the display interface

Conditions: The vehicle is at

(namely the distance between

will not switch over if the BVS

other than reverse gear and the

outer edges of left and right

button is pressed, the left/right

vehicle speed is less than

exterior rearview mirrors). In

turn is operated, or the hazard

20km/h.

such case, the display interface

warning lamp is turned on.

The display interface of

will not switch over if the BVS

Disengage from the reverse

AVM is panorama view + rear

button is pressed, the left/right

gear to turn off the AVM. If the

view, with static auxiliary lines

turn is operated, or the hazard

left/right turn is operated, the

(semi-transparent).

The red

warning lamp is turned on.

display interface will switch

auxiliary lines indicate

0~1m

Disengage from the reverse gear

over to left view (or right view)

spacing from the rear bumper,

to turn off the AVM. If the

Page 169 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

left/right turn is operated, the

immediately turn off the AVM.

not at reverse gear and there is

display interface will switch

Under left/right turn status, the

no left/right turn operation.

over to left view (or right view)

display interface will not switch

Warning: The

360º panorama

+ panorama view. When the

over if the BVS button is

camera system will not display

left/right turn signal is turned off,

pressed. When the hazard

the objects beyond the visual

the AVM will turn off

warning lamp switch is pressed,

field of cameras or beneath the

immediately and return to

the display interface will switch

bumpers or vehicle. It’s only

original working status of DVD.

over to front view + panorama

functioned as the driving

Conditions: The vehicle is at

view. The AVM will be turned

assisting system so that the

other than reverse gear and the

off automatically after 30s or by

detected distance may differ

vehicle speed is less than

pressing and holding the BVS

from the actual distance. During

20km/h.

button for 1.5s.

long distance or high speed

Turn on the left or right turn

Note: After the button is pressed

reversing operation or there is a

signal lamp to display left view

to turn on AVM, the AVM will

possibility of incoming vehicle

(or right view) + panorama view.

turn off 90s if the transmission is

from two sides, carefully

Exit the left/right turn to

observe the surrounding area of

Page 170 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

the vehicle, instead of merely

and are skilled in operations, in

The locations of four

relying on the camera interface

accordance with the standards

cameras are as below:

for operations of vehicle. The

and specifications of Haima Car

Front camera is arranged at

negligence before driving will

Co.,Ltd Only the authorized

front grille.

probably cause injury, death, or

sales and service shops of

vehicle damage. Before the

Haima Car Co.,Ltd qualify these

driving, make sure to check the

requirements.

front, rear, and surrounding area

The user shall periodically

of the vehicle.

check the cleanliness of front,

● Maintenance

rear, left, and right cameras (4

The panorama camera

pieces) and check for presence

Left and right cameras are

system requires maintenances as

of looseness during use. Upon

arranged beneath the left and

same as other machineries.

detection of looseness, fasten at

right

rearview

mirrors

The maintenance works shall be

the

4S shop and calibrate the

respectively.

fulfilled by the technicians, who

interface along with professional

passed professional trainings

calibration personnel.

Page 171 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Configurations and Functions

in order to prevent incorrect

display of image.

◆ Replacement of parts

If the fitting parts of the

The rear camera is arranged

panorama

camera

system

above the license plate.

(including front grille, left and

right rearview mirrors, and

liftgate) are replaced in the later

phase, calibrate the display

image at

4S shop after the

replacement, otherwise it will

Notice: The user shall not

probably cause splicing error in

change the installation locations

the spliced panorama image.

of cameras without permission,

Page 172 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and Operations

Chapter III Driving and

timely to maintain the front/rear

◆ Check the instruments,

Operations

tire pressure at 230kPa/210kPa.

indicator lamps, and warning

Before Driving

◆ Check the wheel nuts for

lamps for normal functioning.

Before driving the vehicle,

looseness and falloff and tighten

◆ Check whether the engine

it’s necessary to check the

when necessary.

hood and trunk are closed tightly,

vehicle, in order to ensure the

◆ Check the area beneath the

whether the driver’s tool is

driving safety and comfort and

vehicle for presence of oil stain

complete, whether the spare tire

eliminate potential problems.

and check the pipelines for

is under normal pressure, and

This is of great importance for

presence of leakage.

whether the interior luggage and

the

safety

the

◆ Check all windows,

articles are properly arranged.

driver/passengers and others.

exterior rearview mirrors, and

◆ Check whether the steering

The checking items include:

front and rear lamps for normal

wheel, seats, and seat belts are

◆ Visually observe the tires.

working and remove the

properly adjusted and the doors

If the tire pressure is low, use air

accumulated snow from the

are closed tightly.

pressure gauge to measure the

vehicle.

II. Operation of Ignition

tire pressure and inflate the tire

Switch

Page 173 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and Operations

The ignition switch is

will be locked to cause

maintained at this position

located on the right side of the

out-of-control of the vehicle.

during normal running status.

steering column. The ignition

Withdraw the key from the

When the ignition switch is

switch totally has four positions:

ignition switch only after the

at this position, all electric

◆ LOCK

vehicle is stopped completely

devices and accessories on the

◆ ACC

and the engine is stopped.

vehicle can be operated.

◆ ON

2.2 ACC

2.4 START

◆ START

When the ignition switch is

Rotate the ignition key to

2.1 LOCK

at this position, the steering

this position to start the engine.

The key can be inserted or

wheel will be unlocked and

The key will automatically

withdrawn only at this position.

some electric accessories can be

return to position ON once

When the key is withdrawn, the

turned on, such as A/C system,

released.

steering wheel will be locked for

audio system, and cigarette

Tip: If the engine fails to start,

anti-theft purpose.

lighter.

make sure to rotate the key to

Notice: Do not withdraw the key

2.3 ON

position LOCK or ACC and

from ignition switch during the

After the engine is started,

restart the engine.

traveling, or the steering wheel

the ignition switch will be

III. Engine Starting

Page 174 of 250

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and Operations

3.1 Prestart checking

the engine. After the engine is

Engine" in

“Malfunctions and

Make sure that the parking

started, immediately release the

Troubleshooting”.

brake lever is pulled up tightly.

key to complete the start

After the engine is started, idle

For manual transmission

process.

the engine for a while, instead of

model, shift the gearshift lever

If the engine fails to start

depressing the accelerator pedal

to neutral gear. For automatic

for the first time, make sure to

immediately.

transmission (CTV) model, shift

rotate the key to position ACC

IV. Operations of Manual

the gearshift lever to gear P or N.

or LOCK before the retry. Wait

Transmission (MT)

The engine can’t be started at

for approximate 15s before retry.

4.1

5MT

any other gear.

If the engine still fails to

The manual transmission

3.2 Start operations

start, depress the accelerator

adopts

5-speed mechanical

Depress the clutch pedal

pedal to the end and start the

structure.

The transmission

(but do not depress the

engine again.

adopts the traditional gearshift

accelerator pedal), rotate the

If the engine still fails to

mode, as shown in the figure.

ignition key to position ON and

start after the above-mentioned

At the time of gearshift,

hold for 2s, and then rotate the

start process is repeated, please

make sure to depress the clutch

key to position START to start

refer to the part “Start Failure of

pedal to the end, shift the

Page 175 of 250

Haima S5. Owners Manual - part 11