Buick Verano (2017 year). Manual

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

In Brief

Universal Remote System

If equipped, this system provides a
way to replace up to three remote
control transmitters used to activate
devices such as garage door
openers, security systems, and
home automation devices.

Read the instructions completely
before attempting to program the
Universal Remote system. Because
of the steps involved, it may be
helpful to have another person
available to assist with programming
the Universal Remote system.

See Universal Remote
System 0 130.

Sunroof

If equipped, the sunroof operates
when the ignition is on or in ACC/
ACCESSORY, or in Retained
Accessory Power (RAP). See
Retained Accessory Power
(RAP) 0 193.

Sunroof Switch

Express-Open/Express-Close :
Press

(1) to the second detent

position and release to
express-open the sunroof. To stop
the movement, press the switch
again. Press

to the second

detent and release to express-close.

Open/Close (Manual Mode) :
Press

(1) to the first detent

position to open the sunroof. Press

to the first detent to close.

Vent : Press

(1) to vent the

sunroof. Press

(1) to close.

Power Sunshade

Sunshade Switch

Express-Open/Express-Close :
Press

(2) to the second detent

position and release to
express-open the sunshade. To stop
the movement, press the switch
again. Press

(2) to the second

detent and release to express-close.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

In Brief

Open/Close (Manual Mode) :
Press

(2) to the first detent

position to open the sunshade.
Press

(2) to the first detent to

close.

The sunroof cannot be opened or
closed if the vehicle has an
electrical failure.

The sunroof is equipped with an
automatic reversal system. See
Sunroof 0 47.

Performance and
Maintenance

Traction Control/
Electronic Stability
Control

The Traction Control System (TCS)
limits wheel spin. The system turns
on automatically every time the
vehicle is started.

The StabiliTrak system assists with
directional control of the vehicle in
difficult driving conditions. The
system also turns on automatically
every time the vehicle is started.
.

To turn off traction control, press
and release

on the center

stack. The traction off light

illuminates. The appropriate DIC
message displays. See Ride
Control System
Messages 0 122.

To turn off both traction control
and StabiliTrak, press and
hold

, until the traction off

light

and the StabiliTrak OFF

light

illuminate.

Press and release

again to

turn on both systems. The
appropriate DIC message
displays. See Ride Control
System Messages 0 122.

See Traction Control/Electronic
Stability Control 0 203.

Tire Pressure Monitor

This vehicle may have a Tire
Pressure Monitor System (TPMS).

The low tire pressure warning light
alerts to a significant loss in
pressure of one of the vehicle's
tires. If the warning light comes on,

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

In Brief

stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label. See
Vehicle Load Limits 0 183. The
warning light will remain on until the
tire pressure is corrected.

The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the
tire pressures are getting low and
the tires need to be inflated to the
proper pressure.

The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.

See Tire Pressure Monitor
System 0 267.

Fuel

Regular Fuel

Use only unleaded gasoline rated
87 octane or higher in your vehicle.
Do not use gasoline with an octane
rating lower as it may result in
vehicle damage and lower fuel
economy. See Fuel 0 216.

E85 or FlexFuel

No E85 or FlexFuel

Gasoline-ethanol fuel blends greater
than E15 (15% ethanol by volume),
such as E85, cannot be used in this
vehicle.

Engine Oil Life System

The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
OIL SOON message when it is time
to change the engine oil and filter.
The oil life system should be reset
to 100% only following an oil
change.

Resetting the Oil Life System

1. Display REMAINING OIL LIFE

on the Driver Information
Center (DIC). See Driver
Information Center (DIC) 0 115.

2. Press and hold SET/CLR to

reset the oil life at 100%.

3. Turn the ignition to LOCK/OFF.

See Engine Oil Life System 0 234.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

In Brief

Driving for Better Fuel
Economy

Driving habits can affect fuel
mileage. Here are some driving tips
to get the best fuel economy
possible.
.

Avoid fast starts and accelerate
smoothly.

Brake gradually and avoid
abrupt stops.

Avoid idling the engine for long
periods of time.

When road and weather
conditions are appropriate, use
cruise control.

Always follow posted speed
limits or drive more slowly when
conditions require.

Keep vehicle tires properly
inflated.

Combine several trips into a
single trip.

Replace the vehicle's tires with
the same TPC Spec number
molded into the tire's sidewall
near the size.

Follow recommended scheduled
maintenance.

Roadside Assistance
Program

U.S.: 1-800-252-1112

TTY Users (U.S. Only):
1-888-889-2438

Canada: 1-800-268-6800

New Buick owners are automatically
enrolled in the Roadside Assistance
Program.

See Roadside Assistance
Program 0 323.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

{

Warning

If the key is unintentionally
rotated while the vehicle is
running, the ignition could be
moved out of the RUN position.
This could be caused by heavy
items hanging from the key ring,
or by large or long items attached
to the key ring that could be
contacted by the driver or
steering wheel. If the ignition
moves out of the RUN position,
the engine will shut off, braking
and steering power assist may be

(Continued)

Warning (Continued)

impacted, and airbags may not
deploy. To reduce the risk of
unintentional rotation of the
ignition key, do not change the
way the ignition key and Remote
Keyless Entry (RKE) transmitter,
if equipped, are connected to the
provided key rings.

If the vehicle is equipped with a
keyed ignition, the ignition key, key
rings, and RKE transmitter,
if equipped, are designed to work
together. As a system, it reduces
the risk of unintentionally moving
the key out of the RUN position.
If replacements or additions are
required, see your dealer. Limit
added items to a few essential keys
or small, light items no larger than
an RKE transmitter.

Interference from radio-frequency
identification (RFID) tags may
prevent the key from starting the
vehicle. Keep RFID tags away from
the key when starting the vehicle.

The key that is part of the RKE
transmitter can be used for the
ignition and all locks if the vehicle is
a Key Access vehicle.

If the vehicle has the keyless
ignition, the key can be used for the
locks.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

Press the button on the RKE
transmitter to extend the key. Press
the button and the key blade to
retract the key.

If the vehicle has an ignition and it
becomes difficult to turn the key,
inspect the key blade for debris.
Periodically clean with a brush
or pick.

See your dealer if a new key is
needed.

If locked out of the vehicle, see
Roadside Assistance
Program 0 323.

With an active OnStar subscription,
an OnStar Advisor may remotely
unlock the vehicle. See OnStar
Overview 0 333.

Remote Keyless Entry
(RKE) System

See Radio Frequency
Statement 0 329.

If there is a decrease in the Remote
Keyless Entry (RKE) operating
range:
.

Check the distance. The
transmitter may be too far from
the vehicle.

Check the location. Other
vehicles or objects may be
blocking the signal.

Check the transmitter's battery.
See “Battery Replacement” later
in this section.

If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.

Remote Keyless Entry
(RKE) System Operation

The Keyless Access system allows
for vehicle entry when the
transmitter is within range. See
“Keyless Access Operation”
following.

The Remote Keyless Entry (RKE)
transmitter functions may work up to
60 m (197 ft) away from the vehicle.

Keep in mind that other conditions,
such as those previously stated, can
impact the performance of the
transmitter.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

With Remote Start Shown

: Press to unlock the driver door

or all doors. See Vehicle
Personalization 0 124.

The turn signal indicators may flash
to indicate unlocking. See Vehicle
Personalization 0 124.

Pressing

will disarm the alarm

system. See Vehicle Alarm
System 0 40.

: Press to lock all doors.

The turn signal indicators may flash
and/or the horn may sound to
indicate locking. See Vehicle
Personalization 0 124.

If the driver door is open when

pressed, all doors lock and the
driver door will immediately unlock,
if enabled through the vehicle
personalization.

If the passenger door is open
when

is pressed, all doors lock.

Pressing

may also arm the alarm

system. See Vehicle Alarm
System 0 40.

: Press and hold to release the

trunk.

: Press and release one time to

initiate vehicle locator. The exterior
lamps flash and the horn chirps
three times.

Press and hold

for at least

three seconds to sound the panic
alarm. The horn sounds and the
turn signals flash for 30 seconds,
or until

is pressed again or the

vehicle is started.

: If equipped, press to operate

the remote start feature. See
Remote Vehicle Start 0 34.

The buttons on the transmitter are
disabled when there is a key in the
ignition, if equipped.

Keyless Access Operation

Some vehicles have a Keyless
Access system that lets you lock
and unlock the doors without
removing the RKE transmitter from
your pocket, purse, briefcase, etc.
The RKE transmitter should be
within 1 m (3 ft) of the door being
opened. If the vehicle has this
feature, there will be buttons on the
outside front door handles.

The vehicle can be customized to
always unlock all doors on the first
lock/unlock button press. See
Vehicle Personalization 0 124.

Keyless Unlocking/Locking from
the Driver Door

When the doors are locked and the
RKE transmitter is within 1 m (3 ft)
of the driver door handle, pressing
the lock/unlock button on the driver
door handle will unlock the driver
door. If the lock/unlock button is

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

pressed again within five seconds,
all passenger doors will unlock. Pull
the door handle to unlatch the door.

Driver Side Shown, Passenger

Similar

Pressing the lock/unlock button will
cause all doors to lock if any of the
following occur:
.

It has been more than
five seconds since the first lock/
unlock button press.

Two lock/unlock button presses
were used to unlock all doors.

Any vehicle door has opened
and all doors are now closed.

Keyless Unlocking/Locking from
the Passenger Doors

When the doors are locked and the
RKE transmitter is within 1 m (3 ft)
of the passenger door handle,
pressing the lock/unlock button on
the passenger door handle will
unlock all doors.

Pressing the lock/unlock button will
cause all doors to lock if any of the
following occur:
.

The lock/unlock button was used
to unlock all doors.

Any vehicle door has opened
and all doors are now closed.

Passive Locking

If equipped with Keyless Access,
the vehicle will lock several seconds
after all doors are closed if the
vehicle is off and at least one
transmitter has been removed or
none remain in the vehicle.

If other electronic devices interfere
with the RKE transmitter signal, the
vehicle may not detect the RKE
transmitter inside the vehicle.
If passive locking is enabled, the

doors may lock with the RKE
transmitter inside the vehicle. Do
not leave the RKE transmitter in an
unattended vehicle.

Temporary Disable of Passive
Locking Feature

Temporarily disable the passive
locking by pressing and holding

on the interior door switch with a
door open for at least four seconds,
or until three chimes are heard.
Passive locking will then remain
disabled until

on the interior door

is pressed, or until the vehicle is
turned on.

To customize the doors to
automatically lock when exiting the
vehicle, see Vehicle
Personalization 0 124.

Remote Left In Vehicle Alert

When the vehicle is turned off and a
remote is left in the vehicle, the horn
will chirp three times after all doors
are closed. To turn on or off see
Vehicle Personalization 0 124.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

Programming Keys to the
Vehicle

Only RKE keys programmed to the
vehicle will work. If a key is lost or
stolen, a replacement can be
purchased and programmed through
your dealer. The vehicle can be
reprogrammed so that lost or stolen
keys no longer work. Any remaining
keys will need to be reprogrammed.
Each vehicle can have up to eight
keys matched to it.

Programming with Two
Recognized Keys (Key
Vehicles Only)

To program a new key:

1. Insert the original, already

programmed key in the ignition
and turn the key to the ON/
RUN position.

2. Turn the key to LOCK/OFF,

and remove the key.

3. Quickly, within five seconds,

insert the second original
already programmed key in the
ignition and turn it to the ON/
RUN position.

4. Turn the key to LOCK/OFF,

and remove the key.

5. Insert the new key to be

programmed and turn it to the
ON/RUN position.

The security light will turn off
once the key has been
programmed.

6. Repeat Steps 1–5 if additional

keys are to be programmed.

If a key is lost or damaged, see your
dealer to have a new key made.

Programming without a
Recognized Key (Key
Vehicles Only)

Program a new key to the vehicle
when a recognized key is not
available. Canadian regulations
require that owners see their dealer.

If two currently recognized keys are
not available, follow this procedure
to program the first key.

This procedure will take
approximately 30 minutes to
complete for the first key. The

vehicle must be off and all of the
keys you wish to program must be
with you.

1. Insert the new vehicle key into

the ignition.

2. Turn to ON/RUN. The security

light will come on.

3. Wait 10 minutes until the

security light turns off.

4. Turn the ignition to LOCK/OFF.

5. Repeat Steps 2–4 two more

times. After the third time, turn
to ON/RUN; the key is learned
and all previously known keys
will no longer work with the
vehicle.

6. To learn a second key, turn to

OFF, insert the second key to
be learned, and turn to
ON/RUN.

After two keys are learned, the
remaining keys can be learned by
following the procedure in
“Programming with Two Recognized
Keys (Key Vehicles Only).”

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

Programming with Recognized
Transmitters (Keyless Access
Vehicles Only)

A new transmitter can be
programmed to the vehicle when
there are two recognized
transmitters. To program, the vehicle
must be off and all of the
transmitters, both currently
recognized and new, must be
with you.

1. Place the two recognized

transmitters near you.

2. Insert the vehicle key of the

new transmitter into the key
lock cylinder on the outside of
the driver door and turn the key
to the unlock position five times
within 12 seconds.

The Driver Information Center
(DIC) displays READY FOR
REMOTE #2, 3, 4 or 5.

3. Place the new transmitter into

the transmitter pocket with the
buttons facing up. The
transmitter pocket is inside the
center console cupholder. The
cupholder liner will need to be
removed to access the
transmitter pocket. Use a finger
or a tool in the notch at the rear
of the cupholders to remove
the liner. See Cupholders 0 95.

4. Press ENGINE START/STOP.

When the transmitter is
learned, the Driver Information
Center (DIC) will show that it is
ready to program the next
transmitter.

5. Remove the transmitter from

the transmitter pocket and
press

To program additional
transmitters, repeat Steps 3–5.

When all additional transmitters
are programmed, press and
hold ENGINE START/STOP for
at least 10 seconds to exit
programming mode.

Programming without Recognized
Transmitters (Keyless Access
Vehicles Only)

If two currently recognized
transmitters are not available, follow
this procedure to program up to
eight transmitters. This feature is
not available in Canada. This
procedure will take approximately
30 minutes to complete. The vehicle
must be off and all of the
transmitters you wish to program
must be with you.

1. Insert the vehicle key of the

transmitter into the key lock
cylinder on the outside of the

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

driver door and turn the key to
the unlock position five times
within 10 seconds.

The Driver Information Center
(DIC) displays REMOTE
LEARN PENDING,
PLEASE WAIT.

2. Wait for 10 minutes until the

DIC displays PRESS ENGINE
START BUTTON TO LEARN
and then press ENGINE
START/STOP.

The DIC display will again
show REMOTE LEARN
PENDING, PLEASE WAIT.

3. Repeat Step 2 two additional

times. After the third time all
previously known transmitters
will no longer work with the
vehicle. Remaining transmitters
can be relearned during the
next steps.

The DIC display should now
show READY FOR REMOTE
# 1.

4. Place the new transmitter into

5. Press ENGINE START/STOP.

When the transmitter is
learned, the DIC will show that
it is ready to program the next
transmitter.

6. Remove the transmitter from

the transmitter pocket and
press

To program additional
transmitters, repeat Steps 4–6.

When all additional transmitters
are programmed, press and
hold ENGINE START/STOP for
at least 12 seconds to exit
programming mode.

Starting the Vehicle with a Low
Transmitter Battery

When trying to start the vehicle,
if the transmitter battery is weak, the
DIC may display NO REMOTE
DETECTED or USE
TRANSMITTER POCKET TO
START. The REPLACE BATTERY
IN REMOTE KEY message may
also be displayed at this time.

To start the vehicle:

1. Remove the cupholder liner

from the center console
cupholder. See
Cupholders 0 95.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

2. Place the transmitter in the

transmitter pocket with the
buttons facing up.

3. With the vehicle in P (Park) or

N (Neutral), press the brake
pedal and ENGINE START/
STOP. See Starting the Engine
0 191 for additional information
about the vehicle's keyless
ignition with pushbutton start.

Replace the transmitter battery
as soon as possible.

Battery Replacement

Replace the battery if the REPLACE
BATTERY IN REMOTE KEY
message displays in the DIC. See
Key and Lock Messages 0 121.

Caution

When replacing the battery, do
not touch any of the circuitry on
the transmitter. Static from your
body could damage the
transmitter.

The battery is not rechargeable. To
replace the battery:

1. Press the button on the

transmitter to extend the key.

2. Remove the battery cover by

prying it with a finger.

3. Remove the battery by pushing

on the battery and sliding it
toward the key blade.

4. Insert the new battery, positive

side facing up. Push the
battery down until it is held in
place. Replace with a CR2032
or equivalent battery.

5. Snap the battery cover back on

to the transmitter.

Remote Vehicle Start

If equipped, this feature allows the
engine to be started from outside
the vehicle.

: This button will be on the RKE

transmitter if the vehicle has remote
start.

The climate control system will use
the previous settings during a
remote start. The rear defog may

come on during remote start based
on cold ambient conditions. The
rear fog indicator light does not
come on during remote start. If the
vehicle has heated seats, they may
come on during a remote start. See
Heated Front Seats 0 54.

Laws in some local communities
may restrict the use of remote
starters. For example, some laws
require a person using remote start
to have the vehicle in view. Check
local regulations for any
requirements.

Other conditions can affect the
performance of the transmitter. See
Remote Keyless Entry (RKE)
System 0 28.

Starting the Vehicle

To start the engine using the remote
start feature:

1. Press and release

2. Immediately after completing

Step 1, press and hold

for at

least four seconds or until the
turn signal lamps flash. The
turn signal lamps flashing

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

confirms the request to remote
start the vehicle has been
received.

When the engine starts, the parking
lamps will turn on and remain on as
long as the engine is running. The
doors will be locked and the climate
control system may come on.

The engine will continue to run for
10 minutes. After 30 seconds,
repeat the steps if a 10-minute
extension is desired. Remote start
can be extended only once.

Extending Engine Run Time

For a 10-minute extension, repeat
Steps 1 and 2 while the engine is
still running. An extension can be
requested, 30 seconds after
starting.

The remote start can be
extended once.

When the remote start is extended,
the second 10 minutes will start
immediately.

For example, if the engine has been
running for five minutes, and
10 minutes are added, the engine
will run for a total of 15 minutes.

A maximum of two remote starts,
or a single start with an extension,
is allowed between ignition cycles.

The vehicle's ignition must be
turned on and then back off before
the remote start procedure can be
used again.

Canceling a Remote Start

To cancel a remote start, do one of
the following:

Press and hold

until the

parking lamps turn off.

Turn on the hazard warning
flashers.

Turn the vehicle on and then off.

Conditions in Which Remote Start
Will Not Work

The remote vehicle start feature will
not operate if:
.

The key is in the ignition (Key
Access) or if the key is in the
vehicle (Keyless Access).

The hood is not closed.

The hazard warning flashers
are on.

The malfunction indicator lamp
is on.

The engine coolant temperature
is too high.

The oil pressure is low.

Two remote vehicle starts, or a
single remote start with an
extension, have already
been used.

The vehicle is not in P (Park).

Door Locks

{

Warning

Unlocked doors can be
dangerous.

Passengers, especially
children, can easily open
the doors and fall out of a
moving vehicle. The chance
of being thrown out of the
vehicle in a crash is

(Continued)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

Warning (Continued)

increased if the doors are
not locked. So, all
passengers should wear
safety belts properly and the
doors should be locked
whenever the vehicle is
driven.

Young children who get into
unlocked vehicles may be
unable to get out. A child
can be overcome by
extreme heat and can suffer
permanent injuries or even
death from heat stroke.
Always lock the vehicle
whenever leaving it.

Outsiders can easily enter
through an unlocked door
when slowing or stopping
the vehicle. Lock the doors
to help prevent this from
happening.

To lock or unlock the door from
outside the vehicle, press

on the

Remote Keyless Entry (RKE)
transmitter or use the key in the
driver door.

From inside the vehicle with the
doors locked, pull once on the door
handle to unlock it, and a second
time to open it.

Push down on the door lock knob
on the top of the door.

Manually locking the driver door
also automatically locks all other
doors.

Keyless Access

If equipped, use the Keyless Access
system to lock and unlock the door.
When the doors are locked and the
Remote Keyless Entry (RKE)
transmitter is within 1 m (3 ft) of the
driver door handle, press the lock/
unlock button. When unlocking from
the driver door, the first press
unlocks that door; press again
within five seconds to unlock all
passenger doors.

For more information see:
.

Remote Keyless Entry (RKE)
System Operation 0 28.

Power Door Locks 0 37.

Vehicle Personalization 0 124.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano Owner Manual (GMNA- Localizing-U.S./Canada-10122753) -

2017 - crc - 5/16/16

Keys, Doors, and Windows

Power Door Locks

: Press to unlock the doors.

: Press to lock the doors.

See “Power Door Locks” in Vehicle
Personalization 0 124.

Delayed Locking

This feature delays the actual
locking of the doors until
five seconds after all doors are
closed.

Delayed locking can only be turned
on when the Open Door Anti
Lockout feature has been turned off.

When

is pressed on the power

door lock switch with the door open,
a chime will sound three times
indicating that delayed locking is
active.

The doors will then lock
automatically five seconds after all
doors are closed. If a door is
reopened before five seconds have
elapsed, the five-second timer will
reset once all the doors are closed
again.

Press

on the door lock switch

again, or press

on the RKE

transmitter, to override this feature
and lock the doors immediately.

Delayed locking can be
programmed through the Driver
Information Center (DIC). See
Vehicle Personalization 0 124.

Automatic Door Locks

The doors will lock automatically
when all doors are closed, the
ignition is on, and the vehicle is
shifted out of P (Park).

To unlock the doors:

Press

on the power door lock

switch.

Shift the transmission into
P (Park).

Automatic door locking cannot be
disabled. Automatic door unlocking
can be programmed. See Vehicle
Personalization 0 124.

Lockout Protection

If equipped with pushbutton start
and the vehicle is in ACC/
ACCESSORY or ON/RUN/START,
and locking is requested with the
driver door open, all doors will lock
and only the driver door will unlock.

If equipped with a keyed ignition,
and the key is in the ignition when
locking is requested with the driver
door open, all doors will lock and
then the driver door will unlock.

Lockout Protection with the key in
the ignition can be manually
overridden with the driver door open
by pressing and holding

on the

power door lock switch.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Buick Verano (2017 year). Manual - part 2