|
|
------------------------------------------------------------------------------------------------------------------------------------------------------------- MOBILITY
Care
Carpets and floor mats
erty. Clean with a clean, antistatic microfiber
cloth.◀
WARNING
Objects in the driver's floor area can limit
NOTE
the pedal distance or block a depressed pedal.
The surface of displays can be damaged
There is a risk of an accident. Stow objects in
with improper cleaning. There is a risk of dam-
the vehicle such that they are secured and can-
age to property. Avoid pressure that is too high
not enter into the driver's floor area. Use floor
and do not use any scratching materials.◀
mats that are suitable for the vehicle and can
be safely attached to the floor. Do not use
Clean with a clean, antistatic microfiber cloth.
loose floor mats and do not layer several floor
For stubborn soiling on the projection lens of
mats. Make sure that there is sufficient clear-
the Head-up Display, dampen the microfiber
ance for the pedals. Ensure that the floor mats
cloth with alcohol. Projection lens, refer to
are securely fastened again after they were re-
page 108.
moved, for instance for cleaning.◀
Long-term vehicle storage
Floor mats can be removed from the car's inte-
rior for cleaning.
When the vehicle is shut down for longer than
three months, special measures must be taken.
If the floor carpets are very dirty, clean with a
Further information is available from a dealer’s
microfiber cloth and water or a textile cleaner.
service center or another qualified service cen-
To prevent matting of the carpet, rub back and
ter or repair shop.
forth in the direction of travel only.
Trailer hitch with removable ball
Keep the ball head and receptacle clean.
Regularly grease or oil bearings, sliding surfaces
and the small balls on the holding pin with
resin-free greases or oils.
Before using steam cleaners or high pressure
cleaners on the vehicle, remove the ball head
and attach the cover to the receptacle.
Do not clean the ball head with a steam cleaner
or high pressure cleaner.
Sensor/camera lenses
To clean sensors and camera lenses, use a cloth
moistened with a small amount of glass deter-
gent.
Displays/Screens/Projection lenses
NOTE
Chemical cleansers, moisture or fluids of
any kind can damage the surface of displays
and screens. There is a risk of damage to prop-
252
|