Porshe 911 (997). Manual - part 716

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  714  715  716  717   ..

 

 

Porshe 911 (997). Manual - part 716

 

 

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Subsequent work

3021

70 57 19 Removing and installing A-pillar trim - as of
MY 2005

- Preliminary work
- Removing A-pillar trim
- Installing A-pillar trim
- Subsequent work

Preliminary work

Preliminary work

1. Move convertible top to service position. → 6101IN IN -Convertible top service

position

Note

Only for vehicles with hardtop.

2. Remove hardtop. → 610219 Removing and installing hardtop - section on "Removing"

3. Remove sun visor. → 682319 Removing and installing sun visor - section on "Removing"

Removing A-pillar trim

Removing convertible-top peg mount

Installation Location:

3022

Installation position of convertible-top peg mount

Removing convertible-top peg mount

1. Unclip cap -1- in a downward direction with a small screwdriver and remove it -arrow A- .

2. Unscrew fastening screws -2- and remove convertible-top peg mount -3- downwards

-arrow B-

 .

Removing A-pillar trim

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing convertible-top peg mount

3023

Installation position for A-pillar trim

Removing A-pillar trim

1. Pull the A-pillar trim -1- inwards along the windscreen frame

-2-

 .

Removing A-pillar trim

2. Remove A-pillar trim -1- in upward

direction.

Diagnostic system: reading out fault memory and activating systems

Removing A-pillar trim

3024

 

 

 

 

 

 

 

Content   ..  714  715  716  717   ..