Content .. 32 33 34 35 ..

TM 10-8400-203-23&P. Manual - part 34

10-8400-203-23&P

0044

0044-4

Table 3. Remarks for Individual Equipment.

(1)

REMARK

CODES

(2)

REMARKS

Service is cleaning of equipment.

Refer to individual work package for tools requirements.

END OF WORK PACKAGE

Table 2. Tools and Test Equipment for Individual Equipment. – Continued

(1)
Tools or
Test
Equipment

(2)
Maintenance
Level

(3)

Nomenclature

(4)
National Stock
Number

(5)

Tool Number

F, H

SEWING MACHINE, DARNING 3530-01-177-8589

207

F, H

SEWING MACHINE, DOUBLE
BOX X

LOCAL PURCHASE RECOMMENDE

D JUKI LR-1900-
HS (8N184)

F, H

SEWING MACHINE, DOUBLE
NEEDLE

3530-00-892-4636 333RBP-6

F, H

SEWING MACHINE, HEAVY
DUTY

3530-01-177-8588 733R-5

F, H

SEWING MACHINE, HEAVY
DUTY, ZIG-ZAG

3530-01-181-1421 146RB-2A

F, H

SEWING MACHINE, LIGHT
DUTY

3530-01-177-8590 7360R

F, H

SEWING MACHINE, LIGHT-
HEAVY DUTY

3530-01-186-3079 SK6F-1

F, H

SEWING MACHINE, MEDIUM
DUTY

3530-01-177-8591 255RB-3

F, H

SEWING MACHINE, ZIG-ZAG

LOCAL PURCHASE 199R-2A (90338)

F, H

SHEARS, TAILORS, 12 INCH

5110-00-223-6370 PD5110-00-223-

6370

F, H

STENCIL CUTTING MACHINE,
HAND OPERATED

7490-00-164-0537 A-A-2722

F, H

STITCH REMOVAL TOOL

LOCAL PURCHASE

F, H

TAPE, MEASURING

5210-00-182-4797 W9312

F, H

TEST SET, INSULATED, BOOT 6685-00-868-8326

ANGSM83/80058

F, H

TESTER, LEAK, INSULATED
BOOT

3520-00-752-8472 MILT43187/8134

F, H

WRENCH, TORQUE, 0-300-
INCH POUNDS

5120-00-776-1841 B107.14M

F, H

YARDSTICK, 36 INCHES

5120-00-985-6610

(7L527)

10-8400-203-23&P

0045

0045-1

SUPPORTING INFORMATION

EXPENDABLE AND DURABLE ITEMS LIST

INTRODUCTION

Scope

This work package lists expendable and durable items that you will need to operate and maintain the
Individual Equipment. This list is for information only and is not authority to requisition the listed items.
These items are authorized to you by CTA 50-970, Expendable/Durable Items (Except Medical Class V
Repair Parts, and Heraldic Items), or CTA 8-100, Army Medical Department Expendable/Durable Items.

Explanation of Columns in Expendable/Durable Items List

Column (1) Item Number. This number is assigned to the entry in the list and is referenced in the
narrative instructions to identify the item (e.g., “Use brake fluid (Item 5, WP 0098 00)”).

Column (2) Level. This column includes the lowest level of maintenance that requires the listed item.
(F= Maintainer or ASB, H=Below Depot)

Column (3) National Stock Number (NSN). This is the NSN assigned to the item which you can use to
requisition it.

Column (4) Item Name, Description, Commercial and Government Entity Code (CAGEC), and Part
Number (P/N). This column provides the other information you need to identify the item.

Column (5) Unit of Issue (U/I). Indicates the physical measurement or count of an item as issued per the
National Stock Number shown in column (3).

Table 1. Expendable and Durable Items List.

(1)

ITEM

NUMBER

(2)

LEVEL

(3)

NATIONAL

STOCK

NUMBER

(4)

ITEM NAME, DESCRIPTION, (CAGEC), PART

NUMBER

(5)
U/I

F, H

LEATHER DRESSING, MILDEW-PREVENTIVE
PARANITROPHENOL, LIQUID FORM, FED-O-L-
1 64A, AMEND 1,1 PT CAN, TYPE 1

F, H

7930-00-170-5467

SOAP, SADDLE, PASTE FORM 1 LB CAN FED
P-S 609

F, H

ADHESIVE, ROOM TEMPERATURE AND
INTERMEDIATE TEMPERATURE SETTING
RESIN (PHENOL RESORANOL AND MELAMINE
BASE) MIL-397B

4 F,

8010-00-160-5799

REMOVER, PAINT AND VARNISH; ORGANIC
SOLVENT NON-FLAMMABLE, LIQUID 1 QT
CAN, TYPE III, CLASS A SPEC. TT-R-251

5 F,

8010-00-160-5851

VARNISH, OLEORESINOUS BASE; 100%,
KAURI REDUCTION; 8 HR MAX., AIR DRY HAD
TIME C TO H GARDNER-HOLDT UNITS
VISCOSITY; 1 QT CAN, FED TT-V-121

F, H

WAX, SKI, MIL-W-1510, 2 OZ. TUBE

F, H

9160-00-903-3999

BLUE-DRY SNOW

TUBE

10-1670-327-23&P

0045

Table 1. Expendable and Durable Items List – Continued.

0045-2

(1)

ITEM

NUMBER

(2)

LEVEL

(3)

NATIONAL

STOCK

NUMBER

(4)

ITEM NAME, DESCRIPTION, (CAGEC), PART

NUMBER

(5)
U/I

F, H

9160-00-903-8339

ORANGE-WET AND CORN SNOW

TUBE

9 F,

9160-00-261-7462 RED-SPEED

F, H

5350-00-192-5049

EMERY CLOTH, 120 GRIT

F, H

9150-00-999-7548

LUBRICANT, INTERLOCKING SLIDE
FASTENER, ZIPPEREASE STICK FORM,
(96980), ZE-2GOV

F, H

8305-01-003-5435

CLOTH, COATED, COTTON, NYLON OXFORD,
6.5 OZ, QUARPEL TREATED, TYPE IL, (81349),
MIL-C-43677

F, H

3305-00-460-4200

CLOTH, COATED, BALLOON, COTTON, FOR
HEAT SEAL PATCHING.TYPE I. (81349),
MILC43677

F, H

8305-01-115-9168

CLOTH, PARACHUTE, NYLON 1.1 OZ./YD., 36
INCH WIDTH, (81349), MIL-C-7020

F, H

8315-00-262-2784

BRAID, TEXTILE, COTTON, TUBULAR, FLAT,
OG-107, WATER REPELLENT, 0.344 INCHES
WIDE, TYPE VLL, CLASS 2, (81349), MIL-B-371

16 F,

8305-00-222-2423

CLOTH, CHEESECLOTH, TYPE 1, CLASS I,
(CAGEC 81348), P/NCCC-C-40

17 F,

7930-00-252-6797

DETERGENT, LAUNDRY, POWDER 50 LB,
TYPE II, OF P-D-245

F, H

7930-00-234-6237

DETERGENT, DRY CLEANING SOLVENT OF A-
A-50293

19 F,

7930-00-282-9699

DETERGENTS, GENERAL PURPOSE, TYPE I
OF MIL-D-16791

20 F,

7930-00-531-9715

DETERGENTS, GENERAL PURPOSE, TYPE II
OF MLL-D-16791

F, H

8040-00-062-4173

ADHESIVE (CAGEC 92755), P/N 10C1693

22 F,

8030-00-174-3201 LEATHER

DRESSING,

MILDREW-PREVENTIVE

PARANITROPHENOL, LIQUID FORM, (CAGEC
81348), P/N O-L-164

F, H

7930-00-170-5467

SOAP, SADDLE (CAGEC 80244), P/N 220-16

F, H

9160-00-903-3999

BLUE-DRY SNOW

F, H

9160-00-903-8339

ORANGE-WET AND CORN SNOW

26 F,

9160-00-261-7468 RED

SPEED

10-1670-327-23&P

0045

Table 1. Expendable and Durable Items List – Continued.

0045-3/4

blank

(1)

ITEM

NUMBER

(2)

LEVEL

(3)

NATIONAL

STOCK

NUMBER

(4)

ITEM NAME, DESCRIPTION, (CAGEC), PART

NUMBER

(5)

U/I

27 F,

SELF-VULCANIZING FLUID, SCHRAEDER NO.
338 (LOCAL PURCHASE: SCHRAEDER
AUTOMOTIVE PRODUCTS, DICKSON, TN
37055)

28 F,

9160-00-253-1171

BEESWAX, TECHNICAL, (CAGEC 81348), P/N
C-B-191

F, H

9160-00-285-2044

WAX, PARAFFIN, TECHNICAL (CAGEC 81348),
P/N VVW95

F, H

7520-00-973-1059

MARKER, FELT TIP, BLACK (CAGEC 81348),
P/N GG-M-00114

F, H

8030-01-104-5392

THREAD LOCKING COMPOUND

32 F,

8010-01-492-6637

POLYURETHANE COATING, MIL-DTL-64159,
TYPE I, COLOR 34094 OF FED-STD-595 (3
PINT KIT)

33 F,

8010-01-493-3168

POLYURETHANE COATING, MIL-DTL-64159,
TYPE II, COLOR 34094 OF FED-STD-595 (3
PINT KIT)

34 F,

8030-01-565-1437

PUTTY

35 F,

5350-00-115-3297

GRAIN, ABRASIVE, MIL-G-5634, TYPE 6

F, H

8040-01-388-0735

ADHESIVE (FOR EDGING)

F, H

6850-01-228-7266

CLEANING COMPOUND, SOLVENT

F, H

6810-01-075-5546

ISOPROPYL ALCOHOL

F, H

8010-01-055-2319

POLYURETHANE COATING, MIL-C-46185
TYPE II, COLOR O.D. 34088 OF FED STD 595
(1 1/4 GAL KIT)

40 F,

8010-01-144-9875

POLYURETHANE COATING, MIL-C-46168,
COLOR D.D. 34087 OF FED STD 595(4 GL
COMPONENT A, 1 GL COMPONENT B).

F, H

WALNUT SHELL FLOUR, 40/1 00 MESH.

F, H

8040-00-165-8614

ADHESIVE, EC 1357, (52152)

43 F,

8040-00-162-9704

ADHESIVE, PASTE, 2 OZ., PN: DEVCON 2 TON
(CLEAR EPOXY), CAGEC 16059

10-8400-203-23&P

0046

0046-1

SUPPORTING INFORMATION

TOOL IDENTIFICATION LIST

INTRODUCTION

Scope

This work package lists all common tools and supplements and special tools/fixtures needed to maintain
OCIE equipment.

Explanation of Columns in the Tool Identification List

Column (1) Item Number. This number is assigned to the entry in the list and is referenced in the initial
setup to identify the item (e.g., Gun, Glue (WP 0046, Item 5)).

Column (2) Item Name. This column lists the item by noun nomenclature and other descriptive features
(e.g., Gauge, belt tension).

Column (3) National Stock Number. This is the National Stock Number (NSN) assigned to the item; use it
to requisition the item.

Column (4) Part Number/CAGEC. Indicates the primary number used by the manufacturer (individual,
company, firm, corporation, or Government activity) which controls the design and characteristics of the
item by means of its engineering drawings, specifications, standards, and inspection requirements to
identify an item or range of items. The manufacturer’s Commercial and Government Entity Code
(CAGEC) is also included.

Column (5) Reference. This column identifies the authorizing supply catalog or RPSTL for items listed in
this work package.

Table 1. Tool Identification List.

(1)

ITEM

NO.

(2)

ITEM NAME

(3)

NATIONAL

STOCK

NUMBER (NSN)

(4)

PART

NUMBER/

CAGEC

(5)

REFERENCE

DIE TOOL, FASTENER

5120-00-090-4412 1401

10-8400-203-23&P

2 DIE,

EYELET

5120-00-144-2097 1442097

10-8400-203-23&P

3 FILE,

HAND,

FLAT

5110-00-249-2848 A-A-2311

10-8400-203-23&P

4 GIMLET

5110-00-725-1095

10-8400-203-23&P

GUN, GLUE

LOCAL PURCHASE

10-8400-203-23&P

HEATED BLADE CUTTER

LOCAL PURCHASE

TM 10-8400-203-23&P

HOLDER, DIE

5120-00-357-6181

00-357-6181

TM 10-8400-203-23&P

HOLDER, DIE FASTENER

5120-00-357-6177

192

TM 10-8400-203-23&P

KNIFE, HOT METAL

LOCAL PURCHASE

10-8400-203-23&P

10 PLIERS,

DIAGONAL

CUTTING

5110-00-222-2708 220-7NS TM

10-8400-203-23&P

11 PLIERS,

LINEMAN’S

5120-00-756-1156 B107.20M

TM 10-8400-203-23&P

PLIERS, NEEDLE NOSE

5120-01-021-7473 B107.13M

TM 10-8400-203-23&P

10-8400-203-23&P

0046

Table 1. Tool Identification List. – Continued

0046-2

PLIERS, SLIP JOINT

5120-00-223-7396

10-8400-203-23&P

PRESS, GROMMET AND
EYELET, HAND
OPERATED

5120-00-880-0619 M370

10-8400-203-23&P

PUNCH AND DIE,
GROMMET INSERTING,
NO 00

5210-00-357-5753 216-00 TM

10-8400-203-23&P

PUNCH AND DIE,
GROMMET INSERTING,
SIZE 0

5120-00-221-1146 217-0

TM 10-8400-203-23&P

17 PUNCH,

CUTTING,

DOUBLE BOW

5110-00-180-0924 149-5/8 TM

10-8400-203-23&P

PUSH DRILL

5110-00-293-3410

TM 10-8400-203-23&P

RULER, TAB, METAL, 16
INCHES

7510-00-173-4897 (93287)

10-8400-203-23&P

SCALE (FOR BASIC
WEIGHT TEST)

LOCAL PURCHASE

TM 10-8400-203-23&P

SCALE, WEIGHING, 0-10
LB.

6670-00-240-5821 A-A-50062

10-8400-203-23&P

22 SCISSORS,

8-INCH

LOCAL

PURCHASE

10-8400-203-23&P

SCREWDRIVER, FLAT TIP 5120-00-596-8502

10-8400-203-23&P

24 SCREWDRIVER,

FLAT-

TIP, 1/4-INCH

5120-00-596-8653 B107.15 TM

10-8400-203-23&P

SEWING MACHINE, BAR
TACK, INDUSTRIAL

LOCAL PURCHASE

RECOMMENDE

D JUKI L-K-

1900 A-HS

(8N184)

TM 10-8400-203-23&P

SEWING MACHINE, BOX
X

LOCAL PURCHASE

RECOMMENDE

D JUKI LK-

1900A-HS

(8N184)

TM 10-8400-203-23&P

27 SEWING

MACHINE,

DARNING

3530-01-177-8589 207

10-8400-203-23&P

28 SEWING

MACHINE,

DOUBLE BOX X

LOCAL PURCHASE

RECOMMENDE

D JUKI LR-

1900-HS

(8N184)

TM 10-8400-203-23&P

29 SEWING

MACHINE,

DOUBLE NEEDLE

3530-00-892-4636 333RBP-6

10-8400-203-23&P

30 SEWING

MACHINE,

HEAVY DUTY

3530-01-177-8588 733R-5

10-8400-203-23&P

31 SEWING

MACHINE,

HEAVY DUTY, ZIG-ZAG

3530-01-181-1421 146RB-2A TM

10-8400-203-23&P

32 SEWING

MACHINE,

LIGHT DUTY

3530-01-177-8590 7360R

10-8400-203-23&P

10-8400-203-23&P

0046

Table 1. Tool Identification List. – Continued

0046-3/4 blank

33 SEWING

MACHINE,

LIGHT-HEAVY DUTY

3530-01-186-3079 SK6F-1

10-8400-203-23&P

34 SEWING

MACHINE,

MEDIUM DUTY

3530-01-177-8591 255RB-3 TM

10-8400-203-23&P

SEWING MACHINE, ZIG-
ZAG

LOCAL PURCHASE

199R-2A

(90338)

TM 10-8400-203-23&P

SHEARS, TAILORS, 12
INCH

5110-00-223-6370 PD5110-00-223-

6370

TM 10-8400-203-23&P

37 STENCIL

CUTTING

MACHINE, HAND
OPERATED

7490-00-164-0537 A-A-2722

10-8400-203-23&P

STITCH REMOVAL TOOL

LOCAL PURCHASE

TM 10-8400-203-23&P

39 TAPE,

MEASURING

5210-00-182-4797 W9312

10-8400-203-23&P

TEST SET, INSULATED,
BOOT

6685-00-868-8326 ANGSM83/8005

TM 10-8400-203-23&P

41 TESTER,

LEAK,

INSULATED BOOT

3520-00-752-8472 MILT43187/813

TM 10-8400-203-23&P

WRENCH, TORQUE, 0-
300-INCH POUNDS

5120-00-776-1841 B107.14M TM

10-8400-203-23&P

YARDSTICK, 36 INCHES

5120-00-985-6610 (7L527)

10-8400-203-23&P

END OF WORK PACKAGE

These are the instructions for sending an electronic 2028

The following format must be used if submitting an electronic 2028. The subject
line must be exactly the same and all fields must be included; however only the
following fields are mandatory: 1, 3, 4, 5, 6, 7, 8, 9, 10, 13, 15, 16, 17, and 27.

From: "Whomever" <whomever@avma27.army.mil>
To: TACOMLCMC.DAForm2028@us.army.mil

Subject:

DA Form 2028

1. From:

Joe

Smith

2. Unit:

home

Address: 4300 Park

4. City:

Hometown

5. St:

6. Zip:

77777

Date Sent: 19-OCT-93

Pub no: 55-2840-229-23

Pub Title: TM

10.

Publication Date: 04-JUL-85

11.

Change Number: 7

12.

Submitter Rank: MSG

13.

Submitter FName: Joe

14.

Submitter MName: T

15.

Submitter LName: Smith

16.

Submitter Phone: 123-123-1234

17. Problem:

18.

Page: 2

19.

Paragraph: 3

20.

Line: 4

21.

NSN: 5

22.

Reference: 6

23.

Figure: 7

24.

Table: 8

25. Item:

26.

Total: 123

27. Text:

This is the text for the problem below line 27.

Content .. 32 33 34 35 ..