|
|
Technical pages ® VI.17 Dimensions d = 64 mm up to d = 108 mm For the dimensions from 64 mm to 108 mm, the electronic press tool (see "Suit- ( Catalog No. 6900 and as a set in a casing with 6 press jaws 12 mm to 35 mm Ca- talog No. 6901) or Mapress is required. In addition, press slings of the correspon- Catalog No. 6933) are required, as well as the in- termediate jaw ZB 302 ( Catalog No. 6931.1) for the dimensions 64 mm and 66.7 mm and the intermediate jaw ZB 321 ( Catalog No. 6931.2) for the dimensions 76.1 mm and 88.9 mm.Alternatively, press slings and Catalog No. 6933) in addition to the intermediate jaw ZB 321 ( Catalog No. 6931.2), the intermediate jaw ZB 322 ( Catalog No. 6931.3) and corresponding press sling and intermediate jaws Dimensions d = 64 mm up to d = 88,9 mm 1. Cut off pipes to Alternative: Alternative: 2. Deburr cut edges on the outside carefully. Preferably with special deburring device (Illustration: Novopress RE1 pipe Catalog No. 4984). Alternative: Semi- circular smooth file. 3. Insert pipe end into the fittings coupling up to the stop, with slight rotation. The fitting outer edge must line up with the press fitting so that the bead of the fittings is inserted into the slot of the press sling |