|
|
01-167
If no DTC is stored:
- Check Oxygen Sensor (O2S) and Oxygen Sensor (O2S) control after Three Way Catalytic
Page 24-140
If "B1 P2 OK." appears in display zone 4:
- Press -C- button.
Work step 12: Three Way Catalytic Converter
Note:
The diagnosis will only be ended if the Oxygen Basic setting Input display group number XXX Indicated on display: - Press buttons -0-, -4- and -6- for "Display group number 46" and confirm entry with -Q- button. System in basic setting 46
1 2 3 4 Indicated on display: (1 to 4 display zones) - Depress brake pedal and hold. - Depress accelerator down to wide open throttle position. Engine speed will be increased by Motronic Engine Control Module (ECM) -J220- to approx. Readiness code |