|
|
Content .. 1167 1168 1169 1170 ..
01-68
Output Diagnostic Test Mode (DTM)
The Output Diagnostic Test Mode (DTM) is part
The DTC memory must be checked after the
Output Diagnostic Test Mode (DTM),
Notes:
Output Diagnostic Test Mode cannot be initiated, or will be interrupted if engine is
Use the -C- button to exit the test sequence at any time.
- Connect VAG 1551 Scan Tool (ST), input address word 56 "Radio" and then press
button, until "Select function XX" is shown in Rapid data transfer HELP Select function XX Indicated on display (select function): - Press buttons -0- and -3- to select "Output Diagnostic Test Mode" function 03. Rapid data transfer Q 03 - Output Diagnostic Test Mode Indicated on display - Press -Q- button to confirm input. Multi-function steering wheel through 11.01, On Board Diagnostic (OBD) 13/2/2005 |