|
|
be cut back to approx. 1 mm. Note For bonding reasons, the adhesive bead on the new part should be cut back only just before it is to be fitted. 15.3.2 Bonding in Note For damaged paintwork or new body parts, apply corrosion pro‐ tection measures according to guidelines in ⇒ Paint workshop manual: Corrosion and corrosion protection, attached and welded parts, materials . Prepare bonding surface on body for spare wheel well -shaded area-. and then dry with a lint-free cloth. – Then apply glass/paint primer -D 009 200 02- evenly using primer applicator -D 009 500 25- . ♦ Drying time approx. 10 minutes remaining residual material must be activated with activator - D 181 801 A1- . WARNING Activator must not come into contact with the paintwork, oth‐ erwise paint surface will be damaged. Passat 2011 ➤ , Passat Variant 2011 ➤ 374 |