|
|
ENGINE E7J-262 11 11 - 5 DISTRIBUTION SYSTEM MOT 484 Cylinder head gasket Mount the MOT 484 device or MOT 588 clamps for jackets maintenance. Check the cylinder head smoothness using a lineal and a set of templates. The maximal admissible deformation: 0.05 mm. The cylinder head is not to be rectified! REMOUNTING Clean the gasket-seating surface of the cyl- inder head. Mount the cylinder head with a new gasket. verse order. Tighten the cylinder head observing the cyl- inder head tightening method described in chap- Mount the distribution belt (see chapter 11 ”Distribution belt”). Adjust the tilters. (see chapter 19 “ Filling and Purging”). REMARK: mounting, |