|
|
EM-4 < PRECAUTION > [QR25DE] PRECAUTIONS PRECAUTION PRECAUTIONS Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT INFOID:0000000005575328 The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along WARNING: • To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by • Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag • Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har- PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS WARNING: • When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni- tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a • When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the battery, and wait at least 3 minutes before performing any service. Precaution for Drain Engine Coolant INFOID:0000000005274248 Drain engine coolant when engine is cooled. Precaution for Disconnecting Fuel Piping INFOID:0000000005274249 • Before starting work, make sure no fire or spark producing items are in the work area. Precaution for Removal and Disassembly INFOID:0000000005274250 • When instructed to use special service tools, use the specified tools. Always be careful to work safely, avoid forceful or uninstructed operations. • Exercise maximum care to avoid damage to mating or sliding surfaces. opposite, and so on. If the order of loosening is specified, do exactly as specified. Power tools may be used Precaution for Inspection, Repair and Replacement INFOID:0000000005274251 Before repairing or replacing, thoroughly inspect parts. Inspect new replacement parts in the same way, and |