Nissan Frontier D40. Manual - part 223

WARNING CHIME FUNCTION

DLK-55

< COMPONENT DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

WARNING CHIME FUNCTION

Description

INFOID:0000000005274539

Performs operation method guide and warning with buzzer.

Component Function Check

INFOID:0000000005274540

1.

CHECK FUNCTION

With CONSULT-III

Check the operation of "INSIDE BUZZER" in the Active Test. Refer to 

MWI-3, "Work Flow"

.

Is the inspection result normal?

Yes

>> Warning buzzer into combination meter is OK.

No

>> Refer to 

DLK-55, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000005274541

1.

CHECK METER BUZZER CIRCUIT

The inoperative warning chime is contained inside the combination meter. Replace combination meter. Refer
to 

MWI-95, "Removal and Installation"

.

>> Inspection End.

DLK-56

< COMPONENT DIAGNOSIS >

HAZARD FUNCTION

HAZARD FUNCTION

Description

INFOID:0000000005274542

Perform answer-back for each operation with number of blinks.

Component Function Check

INFOID:0000000005274543

1.

CHECK FUNCTION

Check hazard warning lamp "FLASHER" in ACTIVE TEST.

Is the inspection result normal?

YES

>> Hazard warning lamp circuit is OK.

NO

>> Refer to 

DLK-56, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000005274544

1.

CHECK HAZARD SWITCH CIRCUIT

Operate the hazard lights by turning ON the hazard warning switch.

Do the lights operate normally?

YES

>> Replace the BCM. Refer to 

BCS-54, "Removal and Installation"

.

NO

>> Repair or replace hazard warning switch circuit. Refer to 

EXL-72, "Wiring Diagram"

.

HEADLAMP FUNCTION

DLK-57

< COMPONENT DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

HEADLAMP FUNCTION

Diagnosis Procedure

INFOID:0000000005274545

1.

CHECK HEADLAMP OPERATION

Do headlamps operate with headlamp switch?
YES or NO

YES

>> Headlamp circuit is OK.

NO

>> Check headlamp circuit. Refer to 

EXL-51, "Wiring Diagram"

.

DLK-58

< COMPONENT DIAGNOSIS >

MAP LAMP AND IGNITION KEYHOLE ILLUMINATION FUNCTION

MAP LAMP AND IGNITION KEYHOLE ILLUMINATION FUNCTION

Diagnosis Procedure

INFOID:0000000005274546

1.

CHECK MAP LAMP OPERATION

When room lamp switch is in "DOOR" position, open the driver or passenger door.
Map lamp and ignition keyhole illumination should illuminate.

Is the inspection result normal?

YES

>> Map lamp circuit is OK.

NO

>> Check map lamp circuit. Refer to 

INL-24, "Description"

.