Nissan Altima L32. Manual - part 1129

ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (PASSENGER SIDE)

PWC-283

< SYMPTOM DIAGNOSIS >

[LH&RH FRONT ANTI-PINCH-COUPE]

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (PASSENGER
SIDE)

Diagnosis Procedure

INFOID:0000000004205129

1.

 PERFORM INITIALIZATION PROCEDURE

Perform initialization procedure. 

Refer to 

PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-

ment"

.

Is the inspection result normal?

YES

>> GO TO 2

NO

>> Repair or replace the malfunctioning parts.

2.

 CHECK DOOR WINDOW SLIDING PART 

• A foreign material adheres to window glass or glass run rubber.

• Glass run rubber wear or deformation.

• Sash is tilted too much or not enough.
Is the inspection result normal?

YES

>> GO TO 3

NO

>> Repair or replace the malfunctioning parts.

3.

 CHECK ENCODER CIRCUIT

Check encoder circuit.

Refer to 

PWC-208, "PASSENGER SIDE : Component Function Check"

.

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

PWC-284

< SYMPTOM DIAGNOSIS >

[LH&RH FRONT ANTI-PINCH-COUPE]

AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES NORMAL-

LY (DRIVER SIDE)

AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES
NORMALLY (DRIVER SIDE)

Diagnosis Procedure

INFOID:0000000004205130

1.

 PERFORM INITIALIZATION PROCEDURE

Perform initialization procedure. 

Refer to 

PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-

ment"

.

Is the inspection result normal?

YES

>> GO TO 2

NO

>> Repair or replace the malfunctioning parts.

2.

 CHECK ENCODER

Check encoder. 

Refer to 

PWC-206, "DRIVER SIDE : Component Function Check"

.

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES NORMAL-

LY (PASSENGER SIDE)

PWC-285

< SYMPTOM DIAGNOSIS >

[LH&RH FRONT ANTI-PINCH-COUPE]

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES
NORMALLY (PASSENGER SIDE)

Diagnosis Procedure

INFOID:0000000004205131

1.

 PERFORM INITIALIZATION PROCEDURE

Perform initialization procedure. 

Refer to 

PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require-

ment"

.

Is the inspection result normal?

YES

>> GO TO 2

NO

>> Repair or replace the malfunctioning parts.

2.

 CHECK ENCODER

Check encoder. 

Refer to 

PWC-208, "PASSENGER SIDE : Component Function Check"

.

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

PWC-286

< SYMPTOM DIAGNOSIS >

[LH&RH FRONT ANTI-PINCH-COUPE]

POWER WINDOW RETAINED POWER OPERATION DOES NOT OPERATE 

PROPERLY

POWER WINDOW RETAINED POWER OPERATION DOES NOT OPER-
ATE PROPERLY

Diagnosis Procedure

INFOID:0000000004205132

1.

 CHECK DOOR SWITCH

Check door switch. 

Refer to 

PWC-212, "Component Function Check"

.

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.