|
|
Replacing Oil Seal CENTER CASE OIL SEAL 1. Remove front propeller shaft — Refer to PD section. 3. Remove companion flange. 4. Remove center case oil seal. 5. Install center case oil seal. 7. Tighten nut to the specified torque. : 226 - 324 N ⋅ m (23 - 33 kg-m, 166 - 239 ft-lb) 8. Install front propeller shaft. YMT010 YMT011 YMT012 SMT488A YMT013 ON-VEHICLE SERVICE TF-4 |