|
|
LAN-154 < DTC/CIRCUIT DIAGNOSIS > [CAN SYSTEM (TYPE 5)] MAIN LINE BETWEEN DLC AND A-BAG CIRCUIT MAIN LINE BETWEEN DLC AND A-BAG CIRCUIT Diagnosis Procedure INFOID:0000000009979051 1. CHECK HARNESS CONTINUITY (OPEN CIRCUIT) 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Disconnect the following harness connectors. With automatic slide door - Harness connector M79 - Harness connector B225 Without automatic slide door - Harness connector M11 - Harness connector E105 4. Check the continuity between the data link connector and the harness connector. - With automatic slide door - Without automatic slide door Is the inspection result normal? YES (Present error)>>Check CAN system type decision again. nosis sensor unit. NO >> Repair the main line between the data link connector and the air bag diagnosis sensor unit. Data link connector Harness connector Continuity Connector No. Terminal No. Connector No. Terminal No. M4 6 M79 9 Existed 14 10 Existed Data link connector Harness connector Continuity Connector No. Terminal No. Connector No. Terminal No. M4 6 M11 41 Existed 14 40 Existed |