|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-27 < SYSTEM DESCRIPTION > C D E F G H I J K L B A O P N ACTIVE TEST FLASHER FLASHER : CONSULT Function (BCM - FLASHER) (Xenon Type Headlamp) INFOID:0000000009978877 WORK SUPPORT *: Factory setting DATA MONITOR NOTE: FR WIPER HI Status of each switch judged by BCM using the combination switch reading function FR WIPER LOW FR WASHER SW FR WIPER INT FR WIPER STOP Displays the status of the front wiper stop position signal received from IPDM E/R via CAN INT VOLUME − 7] Status of each switch judged by BCM using the combination switch reading function RR WIPER ON Status of each switch judged by BCM using the combination switch reading function RR WIPER INT RR WASHER SW RR WIPER STOP Rear wiper motor (stop position) status input from the rear wiper motor Monitor Item [Unit] Description Test item Operation Description FR WIPER Hi Transmits the front wiper request signal (HI) to IPDM E/R via CAN communication to op- Lo Transmits the front wiper request signal (LO) to IPDM E/R via CAN communication to INT Transmits the front wiper request signal (INT) to IPDM E/R via CAN communication to Off Stops transmitting the front wiper request signal to stop the front wiper operation. RR WIPER On Output the voltage to operate the rear wiper motor. Off Stops the voltage to stop the rear wiper motor. Service item Setting item Setting HAZARD ANSWER Lock Only With locking only Sets the hazard warning lamp answer back function Unlk Only With unlocking only Lock&Unlk * With locking/unlocking Off Without the function |