|
|
Content .. 1244 1245 1246 1247 ..
WCS-14 < SYSTEM DESCRIPTION > DIAGNOSIS SYSTEM (COMBINATION METER) DIAGNOSIS SYSTEM (COMBINATION METER) CONSULT Function INFOID:0000000009864204 CONSULT APPLICATION ITEMS CONSULT can perform the following diagnosis modes via CAN communication and the combination meter. SELF DIAG RESULT DATA MONITOR NOTE: Display Item List X: Applicable System Diagnosis mode Description METER/M&A Self Diagnostic Result The combination meter checks the conditions and displays memorized errors. Data Monitor Displays the combination meter input/output data in real time. Warning history Lighting history of the warning lamp and indicator lamp can be checked. Display item [Unit] MAIN SIGNALS Description SPEED METER X Value of vehicle speed signal received from ABS actuator and electric unit (control SPEED OUTPUT X Vehicle speed signal value transmitted to other units via CAN communication. ODO OUTPUT Odometer signal value transmitted to other units via CAN communication. TACHO METER X Value of the engine speed signal received from ECM via CAN communication. FUEL METER X Fuel level indicated on combination meter. W TEMP METER ° C] X Value of engine coolant temperature signal is received from ECM via CAN com- ABS W/L Status of ABS warning lamp detected from ABS warning lamp signal is received VDC/TCS IND Status of VDC OFF indicator lamp detected from VDC OFF indicator lamp signal SLIP IND Status of VDC warning lamp detected from VDC warning lamp signal received BRAKE W/L Status of brake warning lamp detected from brake warning lamp signal is received DOOR W/L Status of door open warning detected from door switch signal received from BCM HI-BEAM IND Status of high beam indicator lamp detected from high beam request signal is re- |