Nissan Versa Note. Manual - part 844
TM-256
< SERVICE DATA AND SPECIFICATIONS (SDS)
[CVT: RE0F11A]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
General Specification
INFOID:0000000009019809
*1: Refer to
MA-11, "Fluids and Lubricants"
.
*2: The CVT fluid capacity is the reference value.
Shift Characteristics
INFOID:0000000009019810
Unit: rpm
CAUTION:
Lock-up is engaged at the vehicle speed of approximately 10 km/h (11 MPH) to 90 km/h (56 MPH).
Stall Speed
INFOID:0000000009019811
Unit: rpm
Applied model
Engine
HR16DE
Axle
2WD
Transaxle model
RE0F11A
Stall torque ratio
1.91 : 1
Pulley ratio
Forward
2.200 – 0.550
Reverse
2.200
Auxiliary gearbox gear ratio
1GR
1.821
2GR
1.000
Reverse
1.714
Counter gear
0.967
Final drive
3.882
Recommended fluid
Genuine NISSAN CVT Fluid NS-3
*1
Fluid capacity
Approx. 6.9 liter (7-1/4 US qt, 6-1/8 Imp qt)
*2
CAUTION:
• Use only Genuine NISSAN CVT Fluid NS-3. Do not mix with other fluid.
• Use only Genuine NISSAN CVT Fluid NS-3. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-3 will damage
the CVT, which is not covered by the (NISSAN new vehicle limited) warranty.
Throttle position
Shift pattern
Engine speed
At 40 km/h (25 MPH)
At 60 km/h (37 MPH)
2/8
“D” position (Overdrive control OFF)
1,300 – 3,100
1,400 – 3,400
“D” position (Overdrive control ON)
2,200 – 3,100
2,700 – 3,500
“L” position
3,000 – 3,800
3,500 – 4,300
8/8
“D” position (Overdrive control OFF)
3,600 – 4,400
4,300 – 5,100
“D” position (Overdrive control ON)
3,600 – 4,400
4,300 – 5,100
“L” position
3,600 – 4,400
4,300 – 5,100
Stall speed
2,420 – 2,870