|
|
TM-386 < DTC/CIRCUIT DIAGNOSIS > [CVT: RE0F11A] P0965 PRESSURE CONTROL SOLENOID B P0965 PRESSURE CONTROL SOLENOID B DTC Logic INFOID:0000000009268195 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: • Be sure to perform “ ” and then perform “DTC CONFIRMATION PRO- CEDURE”. • Never perform “DTC CONFIRMATION PROCEDURE” before the repairs. Doing so may result in a sec- ondary malfunction. • Be careful of the driving speed. 1. PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test. >> GO TO 2. 2. CHECK DTC DETECTION 1. Start the engine. 2. Drive the vehicle. 3. Maintain the following conditions for 20 seconds or more. 4. Stop the vehicle. 5. Check the first trip DTC. YES >> Go to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000009268196 1. CHECK INTERMITTENT INCIDENT GI-45, "Intermittent Incident" Is the inspection result normal? YES >> Replace transaxle assembly. Refer to TM-452, "Removal and Installation" . NO >> Repair or replace malfunctioning parts. DTC Trouble diagnosis name DTC detection condition Possible causes P0965 Pressure control solenoid B The detection conditions continuously for 5 tions - Auxiliary gearbox shifting is not in progress. Primary pressure solenoid valve Vehicle speed : 20 km/h (13 MPH) or more |