|
|
TM-142 < DTC/CIRCUIT DIAGNOSIS > [4AT: RE4F03C] P0705 TRANSMISSION RANGE SWITCH A Is the check result normal? YES >> GO TO 3. NO >> Repair or replace the malfunctioning parts. 3. CHECK D POSITION SW CIRCUIT (CHECK 2) 1. Disconnect the transmission range switch connector. 2. Turn the ignition switch ON. 3. Check the voltage between the TCM harness connector and ground. Is the check result normal? YES >> GO TO 14. NO >> Repair or replace the malfunctioning parts. 4. CHECK N POSITION SW CIRCUIT (CHECK 1) 1. Turn ignition switch OFF. 2. Disconnect the TCM connector. 3. Check the continuity between the TCM harness connector terminals. Is the check result normal? YES >> GO TO 5. NO >> Repair or replace the malfunctioning parts. 5. CHECK N POSITION SW CIRCUIT (CHECK 2) 1. Disconnect the transmission range switch connector. 2. Turn ignition switch ON. 3. Check the voltage between the TCM harness connector and ground. Is the check result normal? YES >> GO TO 14. NO >> Repair or replace the malfunctioning parts. 6. CHECK P POSITION SW CIRCUIT (CHECK 1) TCM harness connector Continuity Connector Terminal F44 4 2 Does not exist 3 5 6 7 TCM harness connector Ground Voltage Connector Terminal F44 4 Ground Approx. 0 V TCM harness connector Continuity Connector Terminal F44 5 2 Does not exist 3 4 6 7 TCM harness connector Ground Voltage Connector Terminal F44 5 Ground Approx. 0 V |