|
|
PWC-38 < DTC/CIRCUIT DIAGNOSIS > DOOR SWITCH 4. Check continuity between BCM connector and ground. Is the inspection result normal? YES >> GO TO 3 NO >> Repair or replace harness. 3. CHECK BCM OUTPUT SIGNAL 1. Connect BCM connector. 2. Check voltage between BCM connector and ground. Is the measurement value within the specification? YES >> GO TO 4 NO >> Replace BCM. Refer to BCS-69, "Removal and Installation" or BCS-122, "Removal and Installa- . 4. CHECK FRONT DOOR SWITCH Check front door switch. PWC-39, "Component Inspection" Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-45, "Intermittent Incident" . NO >> Replace front door switch. BCM connector Terminal Front door switch connector Terminal Continuity M18 (without Intelligent Key system) 12 RH: B16 3 Yes M19 (without Intelligent Key system) 47 LH: B8 M100 (with Intelligent Key system) 45 RH: B16 M100 (with Intelligent Key system) 47 LH: B8 BCM connector Terminal Ground Continuity M18 (without Intelligent Key sys- tem) 12 No M19 (without Intelligent Key sys- tem) 47 M100 (with Intelligent Key system) 45 M100 (with Intelligent Key system) 47 Terminal Voltage (V) (Approx.) (+) (–) BCM connector Terminal M18 (without Intelligent Key system) 12 Ground Battery voltage M19 (without Intelligent Key system) 47 M100 (with Intelligent Key sys- tem) 45 M100 (with Intelligent Key sys- tem) 47 |