|
|
BRM-10 < PREPARATION > REPAIRING MATERIAL PREPARATION REPAIRING MATERIAL Foam Repair INFOID:0000000009268576 During factory assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam insulators. URETHANE FOAM APPLICATIONS Use commercially available Urethane foam for sealant (foam material) repair of material used on vehicle. Read instructions on product for fill procedures. FILL PROCEDURES Example of foaming agent filling operation procedure: 1. Fill procedures after installation of service part. Install service part. d. Insert nozzle into hole (A) near fill area and fill foam material (1) or fill enough to close gap with the service part. 2. Fill procedures before installation of service part: Fill with enough foam material on the wheelhouse outer side to close the gap with the service part while avoiding the flange area. <Urethane foam for foaming agent> 3M™ Automix™ Flexible Foam 08463 or equiva- 1. Urethane foam A. Nozzle insert hole Front JSKIA0129GB |