Nissan Maxima. Manual - part 129

AV-336

< BASIC INSPECTION >

[COLOR DISPLAY - W/ BOSE]

DIAGNOSIS AND REPAIR WORKFLOW

Is any DTC No. displayed?

YES

>> GO TO 3

NO

>> GO TO 4

3.

CHECK SELF-DIAGNOSIS RESULTS (CONSULT)

1. Check the DTC No. indicated in the self-diagnosis results.

2. Perform the relevant diagnosis referring to the DTC No. list. Refer to 

AV-437, "DTC Index"

.

NOTE:

Start with the diagnosis for the CAN communication system if “CAN COMM CIRCUIT [U1000] or CONTROL

UNIT (CAN) [U1010]” is displayed.

>> GO TO 5

4.

PERFORM DIAGNOSIS BY SYMPTOM

Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to 

AV-472, "Symptom

Table"

.

>> GO TO 5

5.

REPAIR OR REPLACE MALFUNCTIONING PARTS

Repair or replace the identified malfunctioning parts.

NOTE:

Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC No. has

been indicated in the self-diagnosis results. 

>> GO TO 6

6.

CHECK AFTER REPAIR

1. Perform self-diagnosis for “MULTI AV” with CONSULT after repairing or replacing the malfunctioning

parts.

2. Check if any DTC No. is displayed in the self-diagnosis results.
Is any DTC No. displayed?

YES

>> GO TO 3

NO

>> GO TO 7

7.

FINAL CHECK

Perform the operation check to confirm that the malfunction symptom is solved or that any other symptoms

are present.
Are any symptoms present?

YES

>> GO TO 4

NO

>> Inspection End.

AV

INSPECTION AND ADJUSTMENT

AV-337

< BASIC INSPECTION >

[COLOR DISPLAY - W/ BOSE]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

INSPECTION AND ADJUSTMENT

REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUST-
MENT
REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUST-
MENT : Description

INFOID:0000000009471279

Adjust the center position of the possible route line of the rear view monitor if it is shifted.

REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUST-
MENT : Special Repair Requirement

INFOID:0000000009471280

1.

STEERING OPERATION

Steer the steering wheel to the leftmost and rightmost positions.

>> GO TO 2

2.

DRIVING

Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of 30 km/h (18.6 MPH) or more.

>> END

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description

INFOID:0000000009471281

BEFORE REPLACEMENT

When replacing AV control unit, save current vehicle specification with CONSULT configuration before

replacement.

AFTER REPLACEMENT

CAUTION:

When replacing AV control unit, you must perform “WRITE CONFIGURATION” with CONSULT.

• Complete the procedure of “WRITE CONFIGURATION” in order.

• If you set incorrect “WRITE CONFIGURATION”, incidents might occur.

• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement

INFOID:0000000009471282

1.

SAVING VEHICLE SPECIFICATION

-CONSULT Configuration

Perform “READ CONFIGURATION” to save current vehicle specification. Refer to 

AV-338, "CONFIGURA-

TION (AV CONTROL UNIT) : Description"

.

NOTE:

If “READ CONFIGURATION” can not be used, use the “WRITE CONFIGURATION - Manual selection”.

>> GO TO 2.

2.

REPLACE AV CONTROL UNIT

Replace AV control unit. Refer to 

AV-481, "Removal and Installation"

.

>> GO TO 3.

3.

WRITING VEHICLE SPECIFICATION

-CONSULT Configuration

AV-338

< BASIC INSPECTION >

[COLOR DISPLAY - W/ BOSE]

INSPECTION AND ADJUSTMENT

Perform “WRITE CONFIGURATION - Config file” or “WRITE CONFIGURATION - Manual selection” to write

vehicle specification. Refer to 

AV-338, "CONFIGURATION (AV CONTROL UNIT) : Special Repair Require-

ment"

.

>> GO TO 4.

4.

OPERATION CHECK

Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course

lines) are normal.

>> WORK END

CONFIGURATION (AV CONTROL UNIT)
CONFIGURATION (AV CONTROL UNIT) : Description

INFOID:0000000009471283

• Since vehicle specifications are not included in the AV control unit after replacement, it is required to write

vehicle specifications with CONSULT.

• Configuration has three functions as follows.

CONFIGURATION (AV CONTROL UNIT) : Special Repair Requirement

INFOID:0000000009471284

1.

WRITING MODE SELECTION

CONSULT Configuration

Select “CONFIGURATION” of AV control unit.

When writing saved data>>GO TO 2.

When writing manually>>GO TO 3.

2.

PERFORM “WRITE CONFIGURATION-CONFIG FILE”

CONSULT Configuration

Perform “WRITE CONFIGURATION-Config file”.

>> WORK END

3.

PERFORM “WRITE CONFIGURATION-MANUAL SELECTION”

CONSULT Configuration

 Select “WRITE CONFIGURATION-Manual selection” to write vehicle specifications into the AV control unit.

For data to write, refer to 

AV-338, "CONFIGURATION (AV CONTROL UNIT) : Configuration List"

.

>> GO TO 4.

4.

OPERATION CHECK

Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course

lines) are normal.

>> WORK END

CONFIGURATION (AV CONTROL UNIT) : Configuration List

INFOID:0000000009471285

CAUTION:

Function

Description

READ CONFIGURATION

• Reads the vehicle configuration of current AV control unit.
• Saves the read vehicle configuration.

WRITE CONFIGURATION-Manual selection

Writes the vehicle configuration with manual selection.

WRITE CONFIGURATION-Config file

Writes the vehicle configuration with saved data.

AV

INSPECTION AND ADJUSTMENT

AV-339

< BASIC INSPECTION >

[COLOR DISPLAY - W/ BOSE]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

Check vehicle specifications before servicing.

MANUAL SETTING ITEM

Note

Items

Setting value

STEERING

LHD

—

RHD

—

GRADE

MODE 1

BASE

MODE 2

OTHER

ENGINE TYPE

NORMAL

—

HYBRID

—

BODY TYPE

NORMAL

NORMAL

CONV

CONVERTIBLE

CAMERA SYSTEM

NONE/AVM

NONE or AVM

REAR

REAR CAMERA

REAR + SIDE

REAR + SIDE CAMERA

4WAS

WITHOUT

—

WITH

—

SOUND SYSTEM

BASE

—

BOSE

—

ANTENNA TYPE

ROD TYPE

—

LONG TYPE

—

DUAL-ZONE AUTO TEMP

WITHOUT

—

WITH

—

DVD PLAY FUNCTION

WITHOUT

—

WITH

—

BODY TYPE

SED 2DR

SEDAN 2 DOOR

SED 4DR 1

SEDAN 4 DOOR 

SED 4DR 2

SEDAN 4 DOOR (WIDE)

H/B 2DR

H/B 2 DOOR

H/B 4DR

H/B 4 DOOR

COUPE 2DR

COUPE 2 DOOR

COUPE T

COUPE T BAR

WGN 4DR 2

49H WAGON 4 DOOR (WIDE)

H/T 2DR 1

H/T 2 DOOR

H/T 2DR 2

H/T 2 DOOR (HIGHROOF)

H/T 4DR 1

H/T 4 DOOR

H/T 4DR 2

H/T 4 DOOR (WIDE)

WGN 2DR

WAGON 2 DOOR

WGN 4DR 1

WAGON 4 DOOR

WGN 4DR 3

WAGON 4 DOOR (HIGHROOF)

WGN 4DR 4

56H WAGON 4 DOOR (WIDE)

VAN 2DR

VAN 2 DOOR

VAN 4DR 1

VAN 4 DOOR

VAN 4DR 2

VAN 4 DOOR (HIGHROOF)

CONV

CONVERTIBLE