|
|
MT-38 [RS6F51R] INPUT SHAFT AND GEARS 9. Remove 5th bushing, thrust washer, 4th input gear, 4th needle 10. Remove 3rd needle bearing. 11. Remove input shaft front bearing. INSPECTION AFTER DISASSEMBLY Check items below. If necessary, replace them with new ones. ● Damage, peeling, dent, uneven wear, bending, etc. of shaft ● Excessive wear, damage, peeling, etc. of gears Synchronizer Check items below. If necessary, replace them with new ones. ● Damage and excessive wear of contact surfaces of coupling ● Coupling sleeve and synchronizer hub must move smoothly. SCIA0919E SCIA0920E SCIA1074J SMT387A |