|
|
EC-666 [QG (WITHOUT EURO-OBD)] DTC P0132 HO2S1 (M/T MODELS) DTC Confirmation Procedure EBS00QWE NOTE: WITH CONSULT-II 1. Start engine and warm it up to normal operating temperature. 2. Turn ignition switch “OFF” and wait at least 10 seconds. 3. Turn ignition switch “ON”. 4. Select “DATA MONITOR” mode with CONSULT-II. 5. Restart engine and let it idle for 2 minutes. 6. If 1st trip DTC is detected, go to EC-668, "Diagnostic Procedure" . WITHOUT CONSULT-II 1. Start engine and warm it up to normal operating temperature. 2. Turn ignition switch “OFF” and wait at least 10 seconds. 3. Restart engine and let it idle for 2 minutes. 4. Turn ignition switch “OFF” and wait at least 10 seconds. 5. Perform “Diagnostic Test Mode II (Self-diagnostic results)” with ECM. 6. If 1st trip DTC is detected, go to EC-668, "Diagnostic Procedure" . SEF174Y |