|
|
EC-266 [QG (WITH EURO-OBD)] DTC P0139 HO2S2 (M/T MODELS) Specification data are reference values and are measured between each terminal and ground. CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam- Diagnostic Procedure EBS00QLB 1. RETIGHTEN GROUND SCREWS 1. Turn ignition switch “OFF”. 2. Loosen and retighten engine ground screws. >> GO TO 2. TER- MINAL NO. WIRE COLOR ITEM CONDITION DATA (DC Voltage) 16 W Heated oxygen sensor 2 [Engine is running] ● Warm-up condition ● Engine speed is 3,000 rpm quickly after the fol- – Keeping the engine speed between 3,500 and 0 - Approximately 1.0V 74 B Sensors' ground [Engine is running] ● Idle speed Approximately 0V MBIB0095E |