|
|
EXL-132 < SYMPTOM DIAGNOSIS > BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM Description INFOID:0000000009175390 The headlamps (both sides) do not switch to high beam when the lighting switch is in the HI or PASS setting. Diagnosis Procedure INFOID:0000000009175391 1. COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION Check the combination switch (lighting and turn signal switch). Refer to Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace the malfunctioning part. 2. CHECK HEADLAMP (HI) REQUEST SIGNAL INPUT CONSULT DATA MONITOR 1. Select HL HI REQ of IPDM E/R DATA MONITOR item. 2. While operating the lighting switch, check the monitor status. Is the inspection results normal? YES >> GO TO 3. NO >> Replace BCM. Refer to BCS-80, "Removal and Installation" 3. HEADLAMP (HI) CIRCUIT INSPECTION Check the headlamp (HI) circuit. Refer to EXL-108, "Diagnosis Procedure" Is the inspection results normal? YES >> Replace IPDM E/R. Refer to PCS-32, "Removal and Installation" NO >> Repair or replace the malfunctioning part. Monitor item Condition Monitor status HL HI REQ Lighting switch position HI or PASS ON Except for HI or PASS OFF |