|
|
EXCESSIVE OPERATION FREQUENCY BRC-111 < SYMPTOM DIAGNOSIS > [VDC/TCS/ABS] C D E G H I J K L M A B BRC N O P EXCESSIVE OPERATION FREQUENCY Description INFOID:0000000009177335 VDC function, TCS function, ABS function, EBD function or hill start assist function operates in excessive operation frequency. Diagnosis Procedure INFOID:0000000009177336 1. CHECK BRAKING FORCE Check brake force using a brake tester. YES >> GO TO 2. NO >> Check brake system. 2. CHECK FRONT AND REAR AXLE Check that there is no excessive looseness in front and rear axle. • Front axle: Refer to Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace malfunctioning components. 3. CHECK WHEEL SENSOR Check wheel sensor. • Check installation and damage of wheel sensor. • Check connection of wheel sensor harness connector. • Check terminal of wheel sensor harness connector. YES >> GO TO 4. NO >> Repair installation or replace wheel sensor. • Front wheel sensor: Refer to BRC-118, "Removal and Installation - Front Wheel Sensor" • Rear wheel sensor: Refer to BRC-120, "Removal and Installation - Rear Wheel Sensor" 4. CHECK SENSOR ROTOR Check that there is no looseness, damage or foreign material on sensor rotor. YES >> GO TO 5. NO >> Repair installation or replace sensor rotor. • Front sensor rotor: Refer to BRC-122, "Removal and Installation - Front Sensor Rotor" . • Rear sensor rotor: Refer to BRC-122, "Removal and Installation - Rear Sensor Rotor" . 5. CHECK WARNING LAMP TURNS OFF Check that ABS warning lamp, brake warning lamp and VDC warning lamp turn OFF approx. 1 second after key switch is turned ON and stay in OFF status during driving. CAUTION: Brake warning lamp turns ON when parking brake is operated (parking brake switch is ON) or brake fluid is less than the specified level (brake fluid level switch is ON). YES >> Inspection End. NO >> Perform self-diagnosis result. Refer to . |