|
|
содержание .. 398 399 400 401 ..
DLK-108 < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] DOOR LOCK ACTUATOR REAR LH : Component Function Check INFOID:0000000005517556 1. CHECK FUNCTION 1. Use CONSULT-III to perform Active Test (“DOOR LOCK”). 2. Touch “ALL LCK” or “ALL UNLK” to check that it works normally. Is the inspection result normal? YES >> Door lock actuator is OK. NO >> Refer to DLK-108, "REAR LH : Diagnosis Procedure" . REAR LH : Diagnosis Procedure INFOID:0000000005517557 1. CHECK DOOR LOCK ACTUATOR SIGNAL 1. Turn ignition switch OFF. 2. Disconnect rear door lock assembly LH. 3. Check voltage between rear door lock assembly LH harness connector and ground. Is the inspection result normal? YES >> Replace rear door lock assembly LH. Refer to DLK-326, "DOOR ASSEMBLY : Removal and NO >> GO TO 2. 2. CHECK DOOR LOCK ACTUATOR CIRCUIT 1. Disconnect BCM connector. 2. Check continuity between BCM harness connector and rear door lock assembly LH harness connector. 3. Check continuity between BCM harness connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-95, "Removal and Installation" NO >> Repair or replace harness. REAR RH REAR RH : Description INFOID:0000000005517558 Locks/unlocks the door with the signal from BCM. REAR RH : Component Function Check INFOID:0000000005517559 1. CHECK FUNCTION (+) (–) Condition of door lock and unlock switch Voltage (V) (Approx.) Rear door lock assembly LH Connector Terminal D85 1 Ground Lock 0 → Battery voltage → 0 2 Unlock 0 → Battery voltage → 0 BCM Rear door lock assembly LH Continuity Connector Terminal Connector Terminal M119 8 D85 1 Existed 10 2 BCM Ground Continuity Connector Terminal M119 8 Not existed 10 |