|
|
содержание .. 1327 1328 1329 1330 ..
SRC-86 < DTC/CIRCUIT DIAGNOSIS > [FOR USA AND CANADA] B1088 PRE-TEN FRONT LH >> GO TO 2. 2. CHECK AIR BAG WARNING LAMP Check the air bag warning lamp status. Is malfunctioning part detected? YES >> Refer to warning lamp flash code chart. NO >> INSPECTION END. Diagnosis Procedure INFOID:0000000005513582 With CONSULT-lll WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes. (To discharge backup capacitor.) • Do not use unspecified tester or other measuring device. DIAGNOSTIC PROCEDURE 1. CHECK HARNESS CONNECTOR Check the connection of harness connector. YES >> GO TO 2. NO >> Repair or replace harness connector. 2. CHECK WIRING HARNESS Check the wiring harness externals. YES >> GO TO 3. NO >> Repair or replace wiring harness. 3. CHECK FRONT SEAT BELT PRE-TENSIONER 1. Replace front LH seat belt pre-tensioner. 2. Check the screen of CONSULT-lll. Is the inspection result normal? YES >> INSPECTION END. NO >> Check the intermittent incident. Refer to GI-39, "Intermittent Incident" . |