|
|
содержание .. 1319 1320 1321 1322 ..
SRC-54 < DTC/CIRCUIT DIAGNOSIS > [FOR USA AND CANADA] B1051, B1056 DRIVER AIRBAG MODULE >> GO TO 2. 2. CHECK AIR BAG WARNING LAMP Check the air bag warning lamp status. Is malfunctioning part detected? YES >> Refer to warning lamp flash code chart. NO >> INSPECTION END. Diagnosis Procedure INFOID:0000000005513537 With CONSULT-lll WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes. (To discharge backup capacitor.) • Do not use unspecified tester or other measuring device. DIAGNOSTIC PROCEDURE 1. CHECK HARNESS CONNECTOR Check the connection of harness connector. YES >> GO TO 2. NO >> Repair or replace harness connector. 2. CHECK WIRING HARNESS Check the wiring harness externals. YES >> GO TO 3. NO >> Repair or replace wiring harness. 3. CHECK SPIRAL CABLE CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect driver side air bag module harness connector and body side harness connector. 3. Check continuity between driver side air bag module harness connector and body side harness connec- 4. Check continuity between driver side air bag module harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Replace spiral cable. Refer to SR-14, "Removal and Installation" 4. CHECK DRIVER AIR BAG MODULE 1. Replace driver air bag module. 2. Check the screen of CONSULT-III. Driver side air bag module harness connector Terminal Body side harness connector Terminal Continuity M350 10 11 M32 28 Existed M351 12 9 29 Driver side air bag module harness con- nector Terminal Ground Continuity M350 10 11 Not existed M351 12 9 |