Nissan Qashqai J11. Manual - part 2236

DAS-358

< BASIC INSPECTION >

[PARK ASSIST]

DIAGNOSIS AND REPAIR WORK FLOW

NOTE:
The customers are not professionals. Never assume that “maybe the customer means” or “maybe the cus-
tomer mentioned this symptom”. 

>> GO TO 2.

2.

SELF-DIAGNOSIS WITH CONSULT

1.

Perform “All DTC Reading” with CONSULT. 

2.

Check if the DTC is detected on the “Self-Diagnostic Results” of following: 

-

“AVM”

Is any DTC detected?

YES

>> GO TO 5.

NO

>> GO TO 3.

3.

ACTION TEST

Perform the following system action test to check the system operation:
• IPA refer to 

DAS-359, "Description"

.

Check if any other malfunctions occur. 

>> GO TO 4.

4.

SYMPTOM DIAGNOSIS

Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to 

DAS-195, "Symptom

Table"

. 

>> GO TO 6.

5.

TROUBLE DIAGNOSIS BY DTC

1.

Check the DTC in the “Self-Diagnostic Results”. 

2.

Perform trouble diagnosis for the detected DTC following:

-

“AVM”: Refer to 

DAS-49, "DTC Index"

.

>> GO TO 6.

6.

MALFUNCTIONING PART REPAIR

Repair or replace the identified malfunctioning parts. 

>> GO TO 7.

7.

REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)

1.

Erases self-diagnosis results. 

2.

Perform “All DTC Reading” again after repairing or replacing the specific items. 

3.

Check if any DTC is detected in self-diagnosis results of following:

-

“AVM”

Is any DTC detected?

YES

>> GO TO 5.

NO

>> GO TO 8.

8.

REPAIR CHECK (ACTION TEST)

Perform the following system action test. Check that the malfunction symptom is solved or no other symptoms
occur.
Is there a malfunction symptom?

YES

>> GO TO 4.

NO

>> Inspection End.

DAS

ACTION TEST

DAS-359

< BASIC INSPECTION >

[PARK ASSIST]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

ACTION TEST

Description

INFOID:0000000010451344

After the Around View Monitor is replaced or after a malfunctioning part of Around View monitor with park
assist is restored, perform an operation inspection and check that the system is operating normally.

Work Procedure

INFOID:0000000010451345

1.

CHECK AROUND VIEW MONITOR OPERATION

Check that the Around View Monitor and camera assistance sonar system are operating normally.Refer to

AV-134, "System Description"

.

>> GO TO 2

2.

CHECK AROUND VIEW MONITOR WITH PARK ASSIST START-UP

1.

Press "Camera switch" and switch to the camera screen.

2.

Press "park assist (PA) switch" on the screen.

3.

Check that the system switches to the parking method selection screen.

>> GO TO 3

3.

CHECK OPERATION OF PARKING MODE SELECTION

1.

Select "Parking mode selector switch" for each parking space.

2.

Check that the parking box lines corresponding to the selected mode are displayed on the screen. Refer
to 

DAS-319, "System Description"

 (possible parking patterns).

>> GO TO 4

4.

CHECK OPERATION OF BOX ADJUSTMENT

1.

With the parking box lines corresponding to the selected mode displayed on the screen, align the vehicle
position with the parking box.

2.

Press "Box adjustment switch" on the screen.

3.

Check that automatic adjustment is performed so that the target parking box (blue box) and the actual
parking box position match.

4.

Press "Parking box position adjustment switch" on the screen, and check that fine adjustment of the box
lines is performed.

>> GO TO 5

5.

CHECK AROUND VIEW MONITOR WITH PARK ASSIST OPERATION

1.

Press "Start switch" and perform parking with automatic steering.

2.

Check that steering operates automatically when parking is started.

3.

Check that information such as the parking guidance box, etc. is displayed on the screen. Refer to 

DAS-

319, "System Description"

 (functions overview).

4.

If there is an obstacle in the target turning box, check that the obstacle is detected and that the warning
sound sounds.

5.

Check that the chime sounds and that Around View monitor with park assist is stopped automatically
when the vehicle moves close to the parking guidance box (blue)

>> INSPECTION END

DAS-360

< SYMPTOM DIAGNOSIS >

[PARK ASSIST]

PARK ASSIST SYMPTOMS

SYMPTOM DIAGNOSIS

PARK ASSIST SYMPTOMS

Symptom Table

INFOID:0000000010451346

Symptom

Confirmation item

Inspection item/Reference page

Touch panel cannot be operated.

In the map screen, etc., touching the same loca-
tion as the display operates normally.

Replace Around View Monitor control 
unit
Refer to 

AV-267, "Removal and Installa-

tion"

In the map screen, etc., touching the same loca-
tion as the display does not operate normally.

Check the NAVI control unit

Steering does not operate automatically 
after parking assist starts

—

Replace Around View Monitor control 
unit
Refer to 

AV-267, "Removal and Installa-

tion"

During parking assist, the system is not 
canceled even if the steering wheel is 
operated

"

 Parking assist malfunction" is display on the 

display.

Check the Power Steering
Refer to 

AV-158, "WITH DRIVER AS-

SISTANCE SYSTEM : DTC Index"

"

 Parking assist malfunction" is not displayed 

on the display.

Replace Around View Monitor control 
unit
Refer to 

AV-267, "Removal and Installa-

tion"

Guide sound is not heard

—

• Check the Around View Monitor con-

trol unit
Refer to 

AV-174, "Work Flow"

• Check the NAVI control unit

Refer to 

AV-174, "Work Flow"

Buzzer sound is not output.

—

• Check Around View Monitor control 

unit
Refer to 

AV-174, "Work Flow"

• Check Sonar control unit

Refer to 

SN-77, "Work Flow"

DAS

NORMAL OPERATING CONDITION

DAS-361

< SYMPTOM DIAGNOSIS >

[PARK ASSIST]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

NORMAL OPERATING CONDITION

Description

INFOID:0000000010451347

PRECAUTIONS WHEN USING AROUND VIEW MONITOR WITH PARK ASSIST

• Around View Monitor with park assist is designed to assist steering wheel operation of the driver when park-

ing the vehicle. This function does not automatically adjust speed or avoid obstacles. The driver should
directly check the safety of the surroundings and the condition of the road surface using the mirrors and their
line of sight, as when performing normal parking operations.

• While the system is operating, move the vehicle slowly, and when it appears likely that the vehicle may con-

tact other vehicles, obstacles, or persons surrounding the vehicle, perform operations to avoid these obsta-
cles by fully depressing the brake, etc.

• Never touch the spoke part of the steering wheel while Around View Monitor with park assist is operat-

ing.There is a risk of injuring hands or fingers. Never allow a scarf or neck tie, etc. to become entangled,
because it may result in an unexpected accident.

• Never drive the vehicle while looking only at the screen. Otherwise. it may result in contact with obstacles or

an unexpected accident.

• When assistance by Around View Monitor with park assist is no longer necessary, touch "End" on the screen

and end the function. If Around View Monitor with park assist remains in operation, the steering operates
automatically. This could result in an unexpected accident.

• Before using Around View Monitor with park assist, directly check visually that there is sufficient space sur-

rounding the vehicle for performing parking operations.

• Never use in the following conditions.
- Unmaintained road surfaces such as sand or gravel, etc.
- Slippery road surfaces where there is snow or ice, etc.
- Sloping roads or roads that are not flat where there is unevenness, or where there are curbs or grooves
- Mechanically operated parking lots
- When snow chains or emergency tires are installed
- When towing
- When a door (including the back door) is not closed

BREAKDOWNS AND EASILY MISTAKEN PHENOMENA

• After white lines are detected automatically and fine adjustment of the parking guidance box is performed,

and if the vehicle is moved without pressing "Start" (start switch), the parking guidance box returns to the ini-
tial position (position before performing fine adjustment).

• When "PA" (Around View Monitor with park assist switch) is pressed in the R (reverse) range, the rearview

screen is displayed and the parking method selection screen is not displayed.

• When aligning the parking box position on the screen, when the vehicle is driven for 5 seconds or more, or

when the vehicle is driven at a speed of 4 km/h or more, the guidance message changes to "Check sur-
roundings for safety." At the same time, the parking guidance box and turning guidance box disappear.

• When Around View Monitor with park assist is finished, the steering wheel does not completely return to the

straight-ahead position (neutral position).