|
|
Content .. 2070 2071 2072 2073 ..
SN-82 < DTC/CIRCUIT DIAGNOSIS > [WITH PARKING SPACE MEASUREMENT] B2710 SIDE SENSOR [FL] B2710 SIDE SENSOR [FL] DTC Logic INFOID:0000000010478172 DTC DETECTION LOGIC Diagnosis Procedure INFOID:0000000010478173 Regarding Wiring Diagram information, refer to 1. CHECK FRONT SPACE MEASUREMENT SENSOR LH CIRCUIT CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect sonar control unit connector and front space measurement sensor LH connector. 3. Check continuity between sonar control unit connector M61 and front space measurement sensor LH con- 4. Check continuity between sonar control unit connector M61 and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness or connectors. 2. CHECK FRONT SPACE MEASUREMENT SENSOR LH SIGNAL CIRCUIT SHORT TO BATTERY 1. Turn ignition switch ON. 2. Check voltage between sonar control unit connector M61 and ground. Is the inspection result normal? YES >> Replace front space measurement sensor LH. Refer to SN-100, "FRONT SENSOR : Removal and Installation - Front Sonar Sensors" . NO >> Repair or replace harness or connectors. CONSULT Display DTC Detection Condition Possible Cause FRONT LEFT SIDE SPACE • Sensor is not configured. • Sensor configuration. Sonar control unit Front space measurement sensor LH Continuity Connector Terminal Connector Terminal M61 28 E133 2 Yes 36 1 Sonar control unit Ground Continuity Connector Terminal M61 28 — No Sonar control unit Ground Voltage (Approx.) Connector Terminal M61 28 — 0V |