Content .. 24 25 26 27 ..

Nissan Juke F15. Manual - part 26

AV-90

< ECU DIAGNOSIS INFORMATION >

[AUDIO WITH NAVIGATION]

AROUND VIEW MONITOR CONTROL UNIT

(Y)

Side camera pas-
senger side image
signal

Input

Igni-

tion

switch

“CAMERA”
switch (around
view monitor
switch) is ON or
shift position is
“R”.

Waveform ac-
cording to cam-
era image is
input.

(B)

Ground

Side camera driver
side ground

—

Igni-

tion

switch

—

0 V

(W)

(B)

Side camera driver
side power supply

Output

Igni-

tion

switch

“CAMERA”
switch (around
view monitor
switch) is ON or
shift position is
“R”.

3.5 V or more

6.0 V

—

Shield

—

(R)

Side camera driver
side image signal

Input

Igni-

tion

switch

“CAMERA”
switch (around
view monitor
switch) is ON or
shift position is
“R”.

Waveform ac-
cording to cam-
era image is
input.

(L)

Ground

Rear camera
ground

—

Igni-

tion

switch

—

0 V

(LG)

(L)

Rear camera power
supply

Output

Igni-

tion

switch

“CAMERA”
switch (around
view monitor
switch) is ON or
shift position is
“R”.

3.5 V or more

6.0 V

—

Shield

—

(V)

Rear camera image
signal

Input

Igni-

tion

switch

“CAMERA”
switch (around
view monitor
switch) is ON or
shift position is
“R”.

Waveform ac-
cording to cam-
era image is
input.

(P)

—

CAN–L

Input/

Output

—

(L)

—

CAN–H

Input/

Output

—

(G)

Ground Reverse signal

Input

Igni-

tion

switch

Shift position is in
“R”

7.0 V or more

12.0 V

Other than shift
position is in “R”

3.0 V or less

0 V

Terminal

(Wire color)

Description

Condition

Standard

Reference value

(Approx.)

–

Signal name

Input/

Output

JSNIA0834GB

AROUND VIEW MONITOR CONTROL UNIT

AV-91

< ECU DIAGNOSIS INFORMATION >

[AUDIO WITH NAVIGATION]

Fail-Safe (Around View Monitor Control Unit)

INFOID:0000000012202504

(B)

Ground Ground

—

Igni-

tion

switch

—

0 V

(LG)

Ground Ignition signal

Input

Igni-

tion

switch

—

7.0 V or more

Battery voltage

Terminal

(Wire color)

Description

Condition

Standard

Reference value

(Approx.)

–

Signal name

Input/

Output

DTC

Display contents of CONSULT

Malfunction detection condition

Fail-safe condition

C1A03
VHCL SPEED SE CIRC

If the vehicle speed signal (wheel speed) from
ABS actuator and electric unit (control unit) re-
ceived by the around view monitor control unit
via CAN communication, are inconsistent

MOD (Moving Object Detection) function is
cancel

C1A39
STRG SEN CIR

If the steering angle sensor is malfunction

• MOD (Moving Object Detection) function is

cancel

• Predicted course line is not displayed.

U0122
VDC P-RUN DIAGNOSIS

If around view monitor control unit detects an
error signal that is received from ABS actuator
and electric unit (control unit) via CAN commu-
nication

MOD (Moving Object Detection) function is
cancel

U0416
VDC CHECKSUM DIAGNOSIS

If around view monitor control unit detects an
error signal that is received from ABS actuator
and electric unit (control unit) via CAN commu-
nication

MOD (Moving Object Detection) function is
cancel

U0428
ST ANGLE SENSOR CALIBRA-
TION

Neutral position adjustment of steering angle
sensor is not complete.

• MOD (Moving Object Detection) function is

cancel

• Predicted course line is not displayed.

U1000
CAN COMM CIRCUIT

When around view monitor control unit cannot
transmit/receive CAN communication signal
continuously for 2 seconds or more.

The following functions are stopped
• When communication of steering angle

sensor signal is not normal

- Predicted course line is not displayed.
- MOD (Moving Object Detection) function is

stopped.

• When communication of vehicle signal,

wheel speed sensor signal, and shift signal
is not normal

- MOD (Moving Object Detection) function is

stopped.

U1010
CONTROL UNIT (CAN)

CAN initial diagnosis malfunction is detected.

The system using the CAN communication
signal does not function.

U111A
REAR CAMERA IMAGE SIGNAL

No-signal status of rear camera image signal is
continued for 500 ms or more while ignition
switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.

Camera image is not displayed (Gray screen
display).

AV-92

< ECU DIAGNOSIS INFORMATION >

[AUDIO WITH NAVIGATION]

AROUND VIEW MONITOR CONTROL UNIT

DTC Inspection Priority Chart

INFOID:0000000012202505

If multiple DTCs are detected simultaneously, check them one by one depending on the following DTC inspec-

tion priority chart.

U111B
SIDE CAMERA RH IMAGE SIG-
NAL

No-signal status of side camera RH image sig-
nal is continued for 500 ms or more while igni-
tion switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.

Camera image is not displayed (Gray screen
display).

U111C
FRONT CAMERA IMAGE SIG-
NAL

No-signal status of front camera image signal is
continued for 500 ms or more while ignition
switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.

Camera image is not displayed (Gray screen
display).

U111D
SIDE CAMERA LH IMAGE SIG-
NAL

No-signal status of side camera LH image sig-
nal is continued for 500 ms or more while igni-
tion switch is ON.
NOTE:
Current malfunction is displayed only and is not
saved.

Camera image is not displayed (Gray screen
display).

U1232
ST ANGLE SEN CALIB

Neutral position adjustment of steering angle
sensor is performed. NG signal from steering
angle sensor is received.

• MOD (Moving Object Detection) function is

stopped.

• Predicted course line is not displayed.

U1304
CAMERA IMAGE CALIB

• When camera calibration is incomplete.
• When camera information in around view

monitor control unit and information read
from camera are not the same.

NOTE:
Current malfunction is displayed only and is not
saved.

Unmatched icon

display (red) is displayed

(applicable for unmatched camera only).

U1305
CONFIG UNFINISH

The vehicle setting of around view monitor con-
trol unit is incomplete.
NOTE:
Current malfunction is displayed only and is not
saved.

Operation is according to the vehicle setting
value as default value.

Other

When around view monitor control unit is not
normal.

Switch to camera screen is not allowed.

DTC

Display contents of CONSULT

Malfunction detection condition

Fail-safe condition

Priority

Detected items (DTC)

U1305: CONFIG UNFINISH

• U1000: CAN COMM CIRCUIT
• U1010: CONTROL UNIT (CAN)

• C1A39: STRG SEN CIR
• U0122: VDC P-RUN DIAGNOSIS
• U0416: VDC CHECKSUM DIAGNOSIS
• U0428: ST ANGLE SENSOR CALIBRATION
• U111A: REAR CAMERA IMAGE SIGNAL
• U111B: SIDE CAMERA RH IMAGE SIGNAL
• U111C: FRONT CAMERA IMAGE SIGNAL
• U111D: SIDE CAMERA LH IMAGE SIGNAL
• U1232: ST ANGLE SEN CALIB
• U1304: CAMERA IMAGE CALIB

C1A03: VHCL SPEED SE CIRC