|
|
32-1 GROUP 32 POWER PLANT MOUNT CONTENTS GENERAL INFORMATION . . . . . . . . SPECIAL TOOL . . . . . . . . . . . . . . . . . ENGINE MOUNTING . . . . . . . . . . . . . REMOVAL AND INSTALLATION . . . . . . . . TRANSAXLE MOUNTING . . . . . . . . . REMOVAL AND INSTALLATION . . . . . . . . FRONT ROLL STOPPER AND CENTER REMOVAL AND INSTALLATION . . . . . . . . REAR ROLL STOPPER AND CROSSMEMBER* . . . . . . . . . . . . . . . REMOVAL AND INSTALLATION . . . . . . . . WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES WARNING • Improper service or maintenance of any component of the SRS, or any SRS-related component, can lead to personal injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and passenger (from rendering the SRS inoperative). • Service or maintenance of any SRS component or SRS-related component must be performed only at an authorized MITSUBISHI dealer. • MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP 52B - Supplemental Restraint System (SRS) before beginning any service or maintenance of any component of the SRS or any SRS-related component. NOTE The SRS includes the following components: SRS air bag control unit, SRS warning light, front impact sensors, air bag module, side-airbag module, curtain air bag module, side impact sensors, seat belt pre-tensioners, clock spring, and interconnecting wiring. Other SRS-related components (that may have to be removed/installed in connection with SRS service or maintenance) are indicated in the table of contents by an asterisk (*). |