|
|
FRONT SUSPENSION REPAIRS 60-49 Refit 1. Ensure new filter has 'O' ring fitted, then fit filter to valve block. 2. Fit new 'O' ring to filter cap. Fit cap and tighten to 35 Nm (26 lbf.ft). 3. Lower vehicle. ADJUSTMENTS, Fluid level check - ACE 5. Start and run engine for 2 minutes, then re- check fluid level in ACE/PAS reservoir. ADJUSTMENTS, Fluid level check - ACE Pressure transducer - ACE $% 60.60.22 CAUTION: The ACE hydraulic system is l ACE components are thoroughly cleaned l all opened pipe and module ports are l all fluid is stored in and administered Remove 1. Raise vehicle on a ramp. 2. Disconnect multiplug from transducer. ring. CAUTION: Always fit plugs to open |