|
|
DIAGRAM OF ROCKER ARM CAP FIXING SCREWS TIGHTENING SEQUENCE The filter (5) operation is unidirectional, therefore Fit the distribution cover (1). Apply silicone LOCTITE 5970 IVECO n˚ 2992644 84392 Apply silicone LOCTITE 5970 IVECO No. 2992644 on the ∅ 1,5 ±, as shown in the figure. Fit the blow-by case (1) within 10’ from sealer Fit the cover (3) and tighten the fastening screws (2). Figure 67 Figure 68 84377 The valve rocker arm cover fastening screws (1) Fit the blow-by case (7) and its gasket and then tighten the Figure 69 17 14 13 1 4 5 8 18 19 20 16 15 12 2 3 6 7 11 10 9 45363 0.5 . ENGINE COMPLETION NOTE NOTE NOTE NOTE SECTION 3 - INDUSTRIAL APPLICATION 23 |