Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual - part 1025

8H–24 SECURITY AND LOCKS

ID Code Additional Registration

This procedure additionally registers a new received ID
code with holding registered ID codes. When total
number of registered ID codes and newly registered ID
code exceeds four, they are erased in order of older one.

Step

Action

Yes

No

1

1. Confirm that all the doors are closed and unlocked.
2. Open the driver’s side door.
3. Insert the key into the starter switch.

Is the action complete?

Go to Step 2

Go to Step 1

2

Turn the starter switch to ACC position and then to OFF position
three times.

NOTE: This step must be carried out within five seconds after step
1.

Is the action complete?

Go to Step 3

Go to Step 1

3

Close the driver’s side door and then open it two times.

NOTE: This step must be carried out within ten seconds after step
2.

Is the action complete?

Go to Step 4

Go to Step 1

4

1. Turn the starter switch to ACC position and then to OFF

position three times.

2. Close the driver’s side door and then open it.

NOTE: This step must be carried out within ten seconds after step
3.

Is the action complete?

Go to Step 5

Go to Step 1

5

The control unit locks and unlocks the doors two times.

Does the control unit work normally?

Go to Step 6

Go to Step 1

6

Operate the lock or unlock button of the transmitter.

NOTE: This step must be carried out within twenty seconds after
step 5.

Is the action complete?

Go to Step 7

Go to Step 1

7

The control unit locks and unlocks the doors one time.

Does the control unit work normally?

Go to Step 8

Go to Step 1

8

Operate the lock or unlock button of the transmitter.

NOTE: This step must be carried out within twenty seconds after
step 7.

Is the action complete?

Go to Step 9

Go to Step 1

9

The control unit compares the two codes sent from the
transmitter.
If the code succeeds in registration, the control unit locks and
unlocks the doors one time.
If the two codes are different from each other or fails in
registration, the control unit locks and unlocks the doors three
times.

NOTE: In any case, this procedure is finished.

Go to Step 1

Go to Step 1

SECURITY AND LOCKS

8H–25

Anti–theft & Keyless Entry Control
Unit/Transmitter Replacement

Anti–theft & Keyless Entry Control Unit
Replacement

1. Remove and install the control unit.

D

Refer to Anti–theft & Keyless Entry Control Unit
Removal and Installation in this section.

2. Register ID code.

D

Refer to ID Code Registration in this section.

3. Check that the keyless entry system works normally.

Transmitter Replacement

1. Prepare a new transmitter.
2. Regiter ID code.

D

Refer to ID Code Registration in this section.

3. Check that the keyless entry system works normally.

Transmitter Battery Replacement

1. Remove a screw to remove the cover.
2. Remove the batteries.
3. Set the new batteries into the transmitter.
4. Install the cover to the transmitter.
5. Check that the keyless entry system works normally.

8H–26 SECURITY AND LOCKS

Main Data and Specifications

Torque Specifications

Application

N·m

Lb Ft

Lb In

Front Door Lock Assembly Fixing Screws

7

—

61

Front Outside Handle and Key Switch Fixing Bolts

9

—

78

Rear Door Lock Assembly Fixing Screws

7

—

61

Rear Outside Handle Fixing Bolts

9

—

78

Tailgate Lock Assembly (LH) Fixing Screws

7

—

61

Tailgate Lock Assembly (RH) Fixing Bolts

11

—

95

Tailgate Outside Handle and Key Cylinder Fixing Bolts

9

—

78

SUN ROOF/CONVERTIBLE TOP

8I–1

TROOPER

BODY AND ACCESSORIES

SUN ROOF/CONVERTIBLE TOP

CONTENTS

Service Precaution

8I–1

. . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Glass

8I–2

. . . . . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Glass and Associated Parts

8I–2

. . . . 

Removal

8I–2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Deflector

8I–4

. . . . . . . . . . . . . . . . . . . . . . 

Removal

8I–4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sunshade

8I–4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Disassembled View

8I–4

. . . . . . . . . . . . . . . . . . . . 

Removal

8I–5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Frame Complete Assembly

8I–6

. . . . . . 

Sun Roof Frame Complete Assembly
 and Associated Parts

8I–6

. . . . . . . . . . . . . . . . . . 

Removal

8I–6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Disassembled View

8I–7

. . . . . . . . . . . . . . . . . . . . 

Disassembly

8I–7

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Reassembly

8I–8

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Drain Hose (Front Side)

8I–9

. . . . . . . . . 

Sun Roof Drain Hose (Front Side)
 and Associated Parts

8I–9

. . . . . . . . . . . . . . . . . . 

Removal

8I–9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Drain Hose (Rear Side)

8I–10

. . . . . . . . . 

Sun Roof Drain Hose (Rear Side)
 and Associated Parts

8I–10

. . . . . . . . . . . . . . . . . . 

Removal

8I–10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Switch

8I–11

. . . . . . . . . . . . . . . . . . . . . . . . 

General Description

8I–11

. . . . . . . . . . . . . . . . . . . . . 

Removal

8I–11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Sun Roof Motor

8I–12

. . . . . . . . . . . . . . . . . . . . . . . . . 

Removal

8I–12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

8I–12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Main Data and Specifications

8I–13

. . . . . . . . . . . . . 

Service Precaution

WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.

CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.

SECTION