When not used, the seat belt can be rolled into the retractor for storage. If needed, the positioning buckle on the belt can
be moved to have the seat belt fully rolled into the retractor. At this time the snap piece is hung at the door column within
reach.
Inspection and maintenance of the seat belt
元Check the seat belt, snap buckle, snap piece and retraction device on a reg鄄
ular basis. Check the support for any damage, to avoid decrease of its safety
effect.
元 Keep sharp-edged articles away from the seat belt to avoid any possible
damage to the belt.
元Change the seat belt if cuts, cracks, slackness or damaged by collision load.
元 Check if the fixing bolts for the support are securely tightened in the floor
pan.
元Change any parts that are found with problems.
元Keep the seat belt clean and dry.
元Wash it only with weak alkaline soapy solution and warm water.
元The seat belt should not be bleached and dyed, or its safety strength will be
weakened.
58
OWNER爷S MANUAL
JAC High end Light Trucks
Mirror
Interior rear-view mirror
The rear-view mirror can be moved back and forth or left and right for adjust鄄
ment.
Door mirrors
The door mirrors on the left and right sides can be adjusted manually in the ar鄄
row direction.
59