|
|
EXL-146 < ECU DIAGNOSIS > [XENON TYPE] BCM (BODY CONTROL MODULE) B2191: DIFFERENCE OF KEY Inhibit engine cranking Erase DTC B2192: ID DISCORD BCM-ECM Inhibit engine cranking Erase DTC B2193: CHAIN OF BCM-ECM Inhibit engine cranking Erase DTC B2557: VEHICLE SPEED Inhibit steering lock When normal vehicle speed signals have been received from ABS B2560: STARTER CONT RELAY Inhibit engine cranking 500 ms after the following CAN signal communication status has B2563: HI VOLTAGE • Inhibit engine cranking 500 ms after the power supply voltage decreases to less than 18 V B2601: SHIFT POSITION Inhibit steering lock 500 ms after the following signal reception status becomes consis- B2602: SHIFT POSITION Inhibit steering lock 5 seconds after the following BCM recognition conditions are ful- voltage) • Vehicle speed: 4 /h or more B2603: SHIFT POSI STATUS Inhibit steering lock 500 ms after the following BCM recognition conditions are fulfilled voltage) • Selector lever P/N position signal: Except P and N positions (0 V) B2604: PNP SW Inhibit steering lock 500 ms after any of the following BCM recognition conditions is ful- age) - P range signal or N range signal (CAN): ON B2605: PNP SW Inhibit steering lock 500 ms after any of the following BCM recognition conditions is ful- age) - PNP switch signal (CAN): ON B2606: S/L RELAY Inhibit engine cranking 500 ms after the following CAN signal communication status has B2607: S/L RELAY Inhibit engine cranking 500 ms after the following CAN signal communication status has Display contents of CONSULT Fail-safe Cancellation |