|
|
DLN-226 < ON-VEHICLE MAINTENANCE > [REAR FINAL DRIVE: R200V] REAR DIFFERENTIAL GEAR OIL ON-VEHICLE MAINTENANCE REAR DIFFERENTIAL GEAR OIL Inspection INFOID:0000000000957427 OIL LEAKAGE • Make sure that oil is not leaking from final drive assembly or around it. OIL LEVEL • Remove filler plug (1) and check oil level from filler plug mounting hole as shown in the figure. CAUTION: Never start engine while checking oil level. • Set a gasket on filler plug (1) and install it on final drive assembly. Refer to DLN-246, "M/T : Exploded View" (A/T models). CAUTION: Never reuse gasket. Draining INFOID:0000000000957428 1. Stop engine. 2. Remove drain plug (1) and drain gear oil. 3. Set a gasket on drain plug (1) and install it to final drive assem- DLN-258, "A/T : Exploded View" (A/T models). CAUTION: Never reuse gasket. Refilling INFOID:0000000000957429 1. Remove filler plug (1). Fill with new gear oil until oil level reaches 2. After refilling oil, check oil level. Set a gasket to filler plug (1), DLN-258, "A/T : Exploded View" (A/T models). CAUTION: Never reuse gasket. PDIA0749J PDIA0748J Oil grade and Viscosity : Refer to . Oil capacity : Refer to PDIA0749J |