121

Section 5 Rear stabilizer bar assembly, strut rod components

Components

Replacement

1. Separate rear stabilizer bar assembly and strut rod components

(1) Remove the nut connecting the rear stabilizer bar and mount

(2) Remove the rear stabilizer bar retaining ring and the rubber ring

(3) Remove the 4 bolts connecting rear stabilizer bar and vehicle body

Rear Stabilizer Bar Rubber Bushing

Rear Stabilizer Bar Clamp

Rear Stabilizer Bar 

Rear Stabilizer Bar 

Retainer

Rear Stabilizer Bar 

Rubber Ring

Rear Stabilizer Bar 

Retainer

Rubber Ring

Bushing 

Strut Rod Mount

 Strut Rod Welding 

Components

122

2. Remove the strut rod components

Remove the thread connecting strut rod and No. 2 transverse arm assembly

3. Disassemble the strut rod components

4. Disassemble the rear stabilizer bar assembly

(1) Remove the rear stabilizer bar clamp

(2) Remove the rear stabilizer bar rubber bushing

5. The installation is in the reverse order of the removal.

Caution:

(1) The torque of the bolt attaching the stabilizer bar assembly to the body: 22~25N.m

(2) The torque of the bolt attaching the strut rod components to No. 2 the transverse arm

assembly: 22~25N.m

(3) The torque of the nut attaching the rear stabilizer bar to the strut rod components:

22~25N.m

123

Section 6 Left & Right Trailing Rod Assembly

Components

Replacement

1. Separate parking brake cable assembly

Remove the parking brake cable set bolt on trailing rod

2.  Remove the trailing rod assembly

(1) Remove the bolt connecting the trailing rod assembly and rear brake assembly.

(2) Remove the bolt connecting the trailing rod assembly and vehicle body

3. The parts installation is in the reverse order of the removal

Caution:

(1) The torque of the bolt attaching the trailing rod assembly to the body: 81~ 96N.m

(2) The torque of the bolt attaching the trailing rod assembly to the rear brake assembly:

81~96N.m

(3) The above bolts shall be tightened to the specified torque at Non-load.

(4) Check rear wheel alignment, adjust it as necessary

Left Brake

Manual Brake Cable 

Trailing Rod Bushing 

LR Trailing

Trailing Rod

124

Section 7 No. 1 Transverse Arm Assembly

Components

Replacement

1. Remove transverse arm assembly No. 1

(1) Remove the bolt connecting the No. 1 transverse arm assembly and rear brake assembly

(2) Remove the bolt connecting the No. 1 transverse arm assembly and vehicle body

2. Install the No. 1 transverse arm assembly

(1) The torque of the thread attaching the transverse arm to the body: 81~ 96N.m

(2)  The torque of the thread attaching the transverse arm to the rear brake assembly: 81~96N.m

3. Check the rear wheel alignment, replace it as necessary.

Pivot bracket

No. 1 Transverse arm 

welding components 

No. 1 Trailing arm bushing