37

13. Install the dipstick guide. See (Figure 87)

14. Install crankshaft timing pulley. See (Figure 77)

15. Install timing belt idler sub-assembly No.1

16. Install timing belt

17. Fill in engine oil

18. Check oil for leakage

Figure 87

38

Section 3  Oil Filter Replacement

1. Detach oil filter sub-assembly. See (Figure 88)

2. Install oil filter sub-assembly. See (Figure 89)

Figure 88

Figure 89

3. Install drain plug

Clean and use new washer to install drain plug.

Torque: 54N. m

4. Oil fill

Capacity:

Oil refill amount with the filter replaced: 3.0L

Oil refill amount without the filter dry fill replaced: 2.80L

Dry fill: 3.3L

5. Check oil for leakage

39

Section 4  Starter Replacement

1. Detach starter assembly. See (Figure 90)

2. Install starter assembly

Torque:

Bolt  37N. m

Figure 90

40

Section 5 Generator Replacement

1. Detach V-belt of generator

2. Detach generator assembly

(a) Disconnect wire joint of generator.

(b) Remove wire of generator.

(c) Disconnect oil pressure switch interface.

(d)  Disconnect A/C compressor switch connector.

(e) Open wire clips.

(f) Detach 2 bolts and generator.

3. Install generator assembly

Torque:

M12 bolt   18N. m

M14 bolt   58N. m

4. Transmit belt tilt and tension state inspection