|
|
(4) Remove the bulb from the front turn/park/side marker bulb holder. INSTALLATION (1) Install the bulb into the front turn/park/side marker bulb holder. (2) Insert the bulb holder straight into the front lamp unit housing and rotate the bulb holder clock- (3) Reconnect the battery negative cable. HEADLAMP LEVELING MOTOR REMOVAL (1) Disconnect and isolate the battery negative cable. (2) Disengage and swing the retainers that secure the front lamp unit rear cover to each side of the (3) Disconnect the front lamp unit wire harness connector from the connector receptacle for the head- (4) Rotate the headlamp leveling motor counter- clockwise about 30 degrees and pull it straight out Fig. 25 Front Turn/Park/Side Marker Bulb Remove/ Install 1 - LAMP HOUSING Fig. 26 Front Lamp Unit Bulbs Remove/Install 1 - COVER RETAINER (2) Fig. 27 Headlamp Leveling Motor 1 - HOUSING 8L - 16 LAMPS/LIGHTING - EXTERIOR VA |